
PIAA 19615 9005 (HB3) Xtreme White Plus
$64.57
Buy on Amazon →
Used for: Headlight Bulb High Beam
Used for: Headlight Bulb Low Beam(with halogen headlights)
Used for: Headlight Bulb Low Beam(with HID headlights)
Used for: Back Up Reverse Light Bulb
Used for: Brake Light Bulb, Tail Light Bulb
Used for: License Plate Light Bulb, Parking Light Bulb
Used for: License Plate Light Bulb, Parking Light Bulb
Used for: Side Marker Light Bulb Front
Used for: Side Marker Light Bulb Rear
Used for: Turn Signal Light Bulb Front, Turn Signal Light Bulb Rear
Used for: Dome Light Bulb, Map Light Bulb
Used for: Trunk or Cargo Area Light
Looking up the bulb sizes for a 2012 Subaru Forester can be confusing because the correct fit depends on the lighting position, not just the vehicle name. This page helps you verify the bulb size by location, so you can match the right part for the headlight, tail light, interior light, and other exterior lamps before you buy.
The 2012 Subaru Forester may use different bulbs depending on trim, market, and lighting package. That is especially important for the low beam headlights, since some versions use halogen bulbs while others use HID bulbs. Use the position-based bulb chart on this page to narrow down the correct replacement for each light on the vehicle.
For the best fitment results, compare the bulb in your vehicle before ordering, especially if your Forester has been modified or if you are working with a used vehicle that may have had parts changed. Trim and package differences can affect the headlight setup, and aftermarket LED or HID conversions may not match the original bulb type listed for the factory assembly. If you are replacing a bulb that has already burned out, check the other side or remove the working bulb first so you can confirm the exact base and size before purchase.
The low beam bulb depends on the headlight type. Forester models with halogen headlights use H11 low beam bulbs, while models with HID headlights use D2R low beam bulbs.
The high beam bulb listed for the 2012 Subaru Forester is 9005.
The front turn signal bulb is 7440A.
The rear turn signal bulb is also 7440A.
Both the brake light and tail light use 7443R bulbs on the 2012 Subaru Forester.
The back up reverse light bulb is 7440.
The front side marker light bulb is 168NA.
The rear side marker light bulb is 7443A.
The license plate light uses 168 or 917 bulbs.
The parking light bulb is 168 or 917.
Both the dome light and map light use DE3175 bulbs.
The trunk or cargo area light uses a 912 bulb.
The center high mount stop light is listed as LED. Other positions on the page use standard bulb sizes, depending on the lighting setup.
Because the 2012 Subaru Forester can vary by body style, market, and lighting package. That means some bulb positions, especially the headlights, may not be the same on every vehicle.
Yes. Checking the installed bulb is the safest way to confirm fitment, especially if your Forester has aftermarket lighting, a previous repair, or a nonstandard headlight conversion.