
Marsauto M1C H11 LED Fog Light Bulbs, 30000LM 6000K Cool ...
$17.99
Buy on Amazon →
Used for: Fog Light Bulb Front(with eyesight package (steering responsive fog))
Used for: Fog Light Bulb Front(with eyesight package (steering responsive fog))
Used for: Headlight Bulb High Beam, Daytime Running Light Bulb(with halogen headlights)
Used for: Headlight Bulb Low Beam
Used for: Back Up Reverse Light Bulb
Used for: License Plate Light Bulb, Parking Light Bulb(with halogen headlights), Side Marker Light Bulb Front, Side Marker Light Bulb Rear, Tail Light Bulb, Interior Door Light Bulb, Trunk or Cargo Area Light
Used for: License Plate Light Bulb, Parking Light Bulb(with halogen headlights), Side Marker Light Bulb Front, Side Marker Light Bulb Rear, Tail Light Bulb, Interior Door Light Bulb, Trunk or Cargo Area Light
Used for: Turn Signal Light Bulb Front
Used for: Turn Signal Light Bulb Rear
Used for: Dome Light Bulb, Map Light Bulb
This 2020 Subaru Forester bulb guide helps you verify the correct bulb size by lighting position, so you can match the right part before ordering replacements. Because Subaru used different lighting setups depending on trim, package, and market, the bulb list can change between halogen and LED-equipped vehicles.
Use this page as a quick reference for the 2020 Subaru Forester when checking headlights, turn signals, brake lights, interior lights, and cargo-area bulbs. Matching the bulb to the exact lamp location is the easiest way to avoid fitment mistakes and get the right replacement the first time.
Fitment can vary a lot on the 2020 Forester, especially between halogen and LED headlight models and between standard trims and eyesight-equipped packages. Some positions use dedicated LED units, while others use replaceable bulbs such as H11, 9005, 921, 7444NA, 7440A, DE3175, and 2825/98. If you are considering an aftermarket LED conversion, make sure the bulb type, connector style, beam pattern, and housing clearance all match your vehicle. The safest approach is to check the bulb already installed in the car before buying, since market differences and previous repairs can affect what is actually in the lamp assembly.
The low beam headlight bulb is H11 on the 2020 Subaru Forester with halogen headlights. LED headlight versions use a dedicated LED setup instead of a standard replaceable low-beam bulb.
The high beam bulb is 9005 on halogen headlight models.
Yes, some 2020 Forester configurations use LED headlights. On those vehicles, the headlight high beam and low beam are listed as LED rather than a standard halogen bulb size.
The daytime running light bulb for halogen headlight models is 9005.
LED headlight models use an LED daytime running light setup, so there is not a standard halogen bulb size listed for that position.
The front turn signal bulb is 7444NA.
The rear turn signal bulb is 7440A.
The back up reverse light bulb is 921.
Both the dome light and map light use DE3175 bulbs.
The license plate light uses 2825 or 98.
The tail light, trunk or cargo area light, interior door light, side marker light front, side marker light rear, and halogen parking light positions all use 2825 or 98.
Those fog light setups use H11 LED or H16 LED, depending on the specific configuration.
In some positions, yes, but fitment depends on the lamp housing, connector, and available space. Always confirm the exact bulb type and check whether the LED replacement is compatible with the vehicle’s lighting system.
Because trim, package, and market differences can change the actual bulb used in your Forester. Checking the installed bulb helps confirm the correct size and avoids ordering the wrong part.