
Marsauto M1C H11 LED Fog Light Bulbs, 30000LM 6000K Cool ...
$17.99
Buy on Amazon →
Used for: Fog Light Bulb Front(with eyesight package (steering responsive fog))
Used for: Fog Light Bulb Front(with eyesight package (steering responsive fog))
Used for: Headlight Bulb High Beam, Daytime Running Light Bulb
Used for: Headlight Bulb Low Beam(with halogen headlights)
Used for: Headlight Bulb Low Beam(with HID headlights)
Used for: Back Up Reverse Light Bulb
Used for: License Plate Light Bulb, Interior Door Light Bulb
Used for: License Plate Light Bulb, Interior Door Light Bulb
Used for: Side Marker Light Bulb Front, Side Marker Light Bulb Rear
Used for: Turn Signal Light Bulb Front, Turn Signal Light Bulb Rear
Used for: Dome Light Bulb, Map Light Bulb
Used for: Trunk or Cargo Area Light
Used for: Trunk or Cargo Area Light
If you need bulb sizes for a 2016 Subaru Legacy, this page helps you verify the correct bulb by lighting position instead of guessing from the trim name alone. The Legacy uses different bulbs for headlights, tail lamps, interior lights, and signal lamps, and the exact fit can change with equipment such as halogen headlights, HID headlights, or the EyeSight lighting package.
Use this 2016 Subaru Legacy bulb guide to match the bulb to the right location before you buy replacements. It covers the most common exterior and interior lighting points, including low beam, high beam, daytime running lights, reverse lights, license plate lights, dome lights, map lights, and more.
Fitment can vary by market, body style, and package, so always confirm the installed bulb before ordering, especially on lighting items that may differ between halogen and HID setups. The 2016 Legacy can use H11 low beams on halogen-equipped cars, while HID-equipped models use D4S low beam bulbs. Some fog light applications also depend on the package and may use H11 LED or H16 LED in aftermarket or converted setups. If you are replacing bulbs with LEDs, make sure the bulb base, polarity, and physical size match the housing, and check whether the vehicle needs a resistor or decoder to prevent warning messages or flicker. When in doubt, remove the old bulb and compare it to the replacement before purchase.
The low beam bulb size for 2016 Subaru Legacy models with halogen headlights is H11.
Models equipped with HID headlights use a D4S low beam bulb.
The high beam bulb size is 9005.
The daytime running light bulb size is 9005.
The back up reverse light bulb size is 921.
The front turn signal light bulb size is 7440A.
The rear turn signal light bulb size is also 7440A.
The license plate light uses 168 or 917 bulbs.
Both the dome light and map light use DE3175 bulbs.
The trunk or cargo area light uses 194 or 7441 bulbs.
Both the front side marker and rear side marker use 168NA bulbs.
Yes. The center high mount stop light, brake light, parking light, and tail light are listed as LED on this page.
Yes. On models with the EyeSight package and steering responsive fog lights, the fog light bulb application can vary and may use H11 LED or H16 LED depending on setup.
Because trim, package, and market differences can change the bulb used in certain positions, and checking the installed bulb helps avoid ordering the wrong part.