
PIAA 19615 9005 (HB3) Xtreme White Plus
$64.57
Buy on Amazon →
Used for: Headlight Bulb High Beam
Used for: Headlight Bulb Low Beam
Used for: Back Up Reverse Light Bulb
Used for: License Plate Light Bulb, Interior Door Light Bulb
Used for: License Plate Light Bulb, Interior Door Light Bulb
Used for: Side Marker Light Bulb Rear
Used for: Turn Signal Light Bulb Front
Used for: Turn Signal Light Bulb Rear
Used for: Dome Light Bulb, Map Light Bulb
Used for: Trunk or Cargo Area Light
Used for: Trunk or Cargo Area Light
The 2018 Subaru Legacy uses different bulb types depending on the lighting position, and this page is designed to help you verify the correct size before you buy replacements. Whether you are changing a headlight, tail light, interior lamp, or reverse light, checking the bulb by location is the easiest way to avoid ordering the wrong part.
Because trim level, lighting package, and market can change the exact setup, the 2018 Subaru Legacy may use LED units in some positions and traditional replaceable bulbs in others. Use this guide to match each bulb location with the correct fitment for your specific vehicle, including front and rear exterior lights and cabin lighting.
For the best fit, compare the bulb listed here with the bulb already installed in your car, especially if your Legacy has a different trim, factory LED lighting, or an optional package. Some positions may be LED assemblies rather than simple replaceable bulbs, and aftermarket LED conversions can require additional parts or may not work the same as the original halogen setup. If you are replacing a halogen bulb, confirm the base type before ordering, and always check the installed bulb first when possible so you can match the exact fitment and avoid surprises.
The listed low beam bulb for the 2018 Subaru Legacy is H11. Some versions of the vehicle may also have LED headlight units, so it is important to verify what is installed on your specific car before ordering.
The high beam bulb listed for the 2018 Subaru Legacy is 9005. If your car has an LED headlight setup, the bulb arrangement may be different from the standard halogen version.
Yes, the bulb chart shows the front fog light bulb as LED. On LED-equipped vehicles, the light may be part of an assembly rather than a simple replaceable bulb.
The back up reverse light bulb listed for the 2018 Subaru Legacy is 921.
The license plate light bulb sizes listed are 168 and 917. Either size may appear depending on the exact lamp setup, so check the bulb already in the car if you want a perfect match.
The interior door light bulb is listed as 168 or 917. These are common wedge-style bulbs used in several interior and courtesy light positions.
The trunk or cargo area light bulb is listed as 194 or 7441. If your cargo lamp has been changed before, confirm the base and shape before purchase.
The front turn signal light bulb listed for the 2018 Subaru Legacy is 7444NA.
The rear turn signal light bulb listed for the 2018 Subaru Legacy is 7440A.
The rear side marker light bulb is listed as 168NA.
Both the dome light and map light bulbs are listed as DE3175. This is a useful match to confirm if you are replacing multiple interior bulbs at once.
Yes, the bulb chart lists the brake light bulb and the center high mount stop light bulb as LED. On many LED setups, the light source is integrated into the lamp assembly.
Yes. Trim, lighting package, body style, and market can affect the exact bulb setup on a 2018 Subaru Legacy, especially for headlights and other exterior lighting.
Only if the bulb position and housing are compatible. Some aftermarket LED bulbs fit physically but may not perform correctly in reflector or projector housings, so it is best to match the original bulb type and verify fitment first.