Used for: Headlight Bulb High Beam and Low Beam
Used for: Back Up Reverse Light Bulb
Used for: License Plate Light Bulb
Used for: Turn Signal Light Bulb Front(with HID headlights)
Used for: Courtesy Light Bulb, Glove Box Light Bulb, Trunk or Cargo Area Light
Used for: Courtesy Light Bulb, Glove Box Light Bulb, Trunk or Cargo Area Light
This page helps you verify the bulb sizes for the 2009 Audi R8 by lighting position, so you can match the correct bulb to the correct socket before you buy. Because the R8 could be equipped with different lighting setups, it is important to check the exact function on the vehicle, not just the model name.
For the 2009 Audi R8, many exterior lighting positions use LED components, while some interior and utility lights use standard bulb sizes such as 2825, 98, 6418, 5200, or 64136. Use the chart on this page to compare headlight, tail light, brake light, turn signal, side marker, license plate, and cargo-area bulb fitment in one place.
Fitment can vary by trim, lighting package, body style, and market, so always confirm whether your 2009 R8 has halogen, HID, or LED headlights before ordering. Some positions also change with aftermarket conversions, especially when owners retrofit LED or HID systems. The safest approach is to inspect the installed bulb or housing label first, then compare it with the bulb chart before purchase. That extra check helps avoid buying the wrong base, wattage, or connector style.
The low beam is listed as LED on this page for the 2009 Audi R8. Because headlight equipment can vary, confirm the exact headlight setup on the car before ordering replacement parts.
The high beam is listed as LED on this page. If your car has a different lighting package or an aftermarket conversion, verify the installed setup before buying.
Yes, an optional listing shows D1S for headlight high beam and low beam on some versions. That means certain trims or markets may use a shared HID-style bulb arrangement instead of separate LED functions.
The license plate light bulb is 6418. This is a common small festoon-style bulb size, but you should still confirm the installed bulb before replacing it.
The glove box light bulb is 2825, 98. Either size may appear depending on the specific lamp assembly, so check the existing bulb if you want an exact match.
The trunk or cargo area light bulb is 2825, 98. This interior bulb can vary by equipment, so it is smart to compare the old bulb with the replacement.
The courtesy light bulb is 2825, 98. If your courtesy lamp has been changed before, verify the socket and bulb length before ordering.
The back up reverse light bulb is 64136. Check the lamp housing and connector condition at the same time, since reverse lights are often exposed to heat and moisture.
Yes, both the brake light bulb and tail light bulb are listed as LED on this page. LED lighting usually means the bulb may be integrated into a module rather than replaced like a standard halogen bulb.
Check the lighting position, headlight type, and whether the car has factory LED, HID, or halogen equipment. Also compare the installed bulb to the chart, since trim and market differences can affect fitment.
Yes. The front turn signal bulb is listed as LED with LED headlights, while the front turn signal bulb with HID headlights is listed as 5200. That difference is important, so match the bulb to the headlight package on the car.
The front side marker light bulb and rear side marker light bulb are both listed as LED. If one side has been modified or repaired before, inspect the installed part to confirm it still matches the original setup.
