Used for: Headlight Bulb High Beam and Low Beam
Used for: Back Up Reverse Light Bulb
Used for: License Plate Light Bulb
Used for: Turn Signal Light Bulb Front(with HID headlights)
This 2011 Audi R8 bulb size page is designed to help you verify the correct bulbs by lighting position before you buy replacements. Because the R8 can use different lighting setups depending on trim, market, and body style, checking the exact lamp location is the safest way to match the right part.
For the 2011 Audi R8, this guide covers key exterior lights such as the low beam, high beam, daytime running light, turn signal, brake light, tail light, parking light, side marker, license plate light, and reverse light. Use the bulb chart on this page to compare each position and confirm the correct fit for your car.
Fitment can vary on the 2011 Audi R8 based on lighting package and whether the car has LED or HID equipment, so always match the bulb to the installed setup rather than assuming every R8 uses the same part. Some positions are listed with LED lighting, while others may use specific bulbs such as 6418 for the license plate light, 64136 for the back up reverse light, 5200 for the front turn signal with HID headlights, and D1S for the headlight high beam and low beam setup. If your car has been converted with aftermarket lighting, the original bulb chart may not fully apply, so it is smart to inspect the bulb already installed before ordering. Checking the old bulb, connector style, and housing type can help avoid returns and make replacement much easier.
It helps you confirm bulb sizes by lighting position, so you can match the correct bulb to the headlight, tail light, brake light, turn signal, side marker, license plate, or reverse light location.
No. Trim, lighting package, market, and body style can change the bulb setup, so the correct bulb should always be verified by position and equipment on the car.
The page lists LED for the headlight bulb low beam on this vehicle.
The page lists LED for the headlight bulb high beam on this vehicle.
The license plate light bulb is listed as 6418.
The back up reverse light bulb is listed as 64136.
The front turn signal light bulb with HID headlights is listed as 5200.
The optional raw list shows D1S for headlight high beam and low beam.
Both positions are listed with LED, but you should still verify the exact lamp location before replacing anything.
Because the 2011 Audi R8 may have different lighting configurations, and the bulb already installed is the best confirmation of the correct fitment.
Yes. Aftermarket conversions can change the original bulb type, connector, or housing, so the factory listing may not match a modified car.
Use the bulb chart for the LED headlight setup and confirm the lighting position carefully, since the front turn signal and other nearby lamps can differ from HID-equipped cars.
Yes, but body style can affect lighting details, so it is still important to verify the exact bulb position and equipment on your specific R8.
Match the bulb by position, confirm whether the car has LED or HID headlights, and compare the old bulb or housing before placing an order.
