Audi R8 2010 Bulb Size
Bulb size chart
This page helps you verify the bulb sizes for the 2010 Audi R8 by lighting position, so you can match the correct bulb before ordering replacements. Because the R8 could be equipped with different lighting packages, the exact bulb type may depend on whether your car has LED headlights, HID headlights, or another factory setup.
Use the bulb chart to look up the exterior and interior lamps one location at a time, including headlights, tail lights, brake lights, turn signals, side markers, license plate lights, and cargo-area bulbs. That makes it easier to confirm the right fit for your specific 2010 Audi R8 without guessing based on the model name alone.
Fitment can vary by trim, market, body style, and lighting package, so it is smart to compare the bulb position on your car with the chart before buying. Some 2010 Audi R8 models use LED lighting in several exterior positions, while others may use different headlight setups such as HID or D1S applications. If your car has been modified with aftermarket conversions, the installed bulb may not match the original factory listing. For the best results, check the bulb already in the housing, confirm the connector style, and verify the part number or base before purchase, especially when replacing headlight or turn signal bulbs.
FAQ
What bulb size does the 2010 Audi R8 use for the low beam headlight?
The low beam headlight is listed as LED on many 2010 Audi R8 applications. Some versions may use D1S for the combined high beam and low beam setup, depending on the lighting package.
What bulb size does the 2010 Audi R8 use for the high beam headlight?
The high beam headlight is listed as LED on many 2010 Audi R8 configurations. If your car has the optional combined high beam and low beam arrangement, the listing may show D1S instead.
Does the 2010 Audi R8 use the same bulb for the front turn signal on every model?
No. The front turn signal bulb depends on the headlight type. With LED headlights, the front turn signal is listed as LED. With HID headlights, the front turn signal is listed as 5200.
What is the rear turn signal bulb size for the 2010 Audi R8?
The rear turn signal light bulb is listed as LED for the 2010 Audi R8.
What bulb is used for the brake light on the 2010 Audi R8?
The brake light bulb is listed as LED. Always confirm the exact lamp position on your car before ordering, since lighting packages can vary.
What bulb size is used for the tail light on the 2010 Audi R8?
The tail light bulb is listed as LED for this model year.
What bulb does the 2010 Audi R8 use for the daytime running light?
The daytime running light bulb is listed as LED on the 2010 Audi R8.
What bulb size is used for the license plate light on the 2010 Audi R8?
The license plate light bulb is listed as 6418.
What bulb size is used for the reverse light on the 2010 Audi R8?
The back up reverse light bulb is listed as 64136.
What bulb size is used for the glove box light, trunk light, and courtesy light?
The glove box light bulb, trunk or cargo area light, and courtesy light are all listed as 2825 or 98.
Are the side marker bulbs on the 2010 Audi R8 LED?
Yes. The front side marker light bulb and rear side marker light bulb are both listed as LED.
Can I use aftermarket LED replacements in place of the factory bulbs?
You can, but fitment and compatibility depend on the housing, connector, and lighting system. For the 2010 Audi R8, it is important to match the correct bulb position and confirm whether the car originally uses LED, HID, D1S, or another setup before converting.
Why should I check the installed bulb before buying a replacement?
Because trim and lighting package differences can change the correct bulb size. Checking the installed bulb helps avoid ordering the wrong part, especially on a performance car like the 2010 Audi R8 where exterior lighting can differ by market or option package.