
Marsauto M1C H11 LED Fog Light Bulbs, 30000LM 6000K Cool ...
$17.99
Buy on Amazon →
Used for: Fog Light Bulb Front
Used for: Fog Light Bulb Front
Used for: Headlight Bulb High Beam and Low Beam
Used for: Back Up Reverse Light Bulb, Turn Signal Light Bulb Rear
Used for: Brake Light Bulb
Used for: License Plate Light Bulb
Used for: Parking Light Bulb, Side Marker Light Bulb Front
Used for: Stepwell Light Bulb, Courtesy Light Bulb(Compare to original - Option 1), Glove Box Light Bulb, Interior Door Light Bulb
Used for: Stepwell Light Bulb, Courtesy Light Bulb(Compare to original - Option 1), Glove Box Light Bulb, Interior Door Light Bulb
Used for: Turn Signal Light Bulb Front
Used for: Courtesy Light Bulb(Compare to original - Option 2), Vanity Mirror Light Bulb
Used for: Courtesy Light Bulb(Compare to original - Option 2), Vanity Mirror Light Bulb
Used for: Dome Light Bulb, Map Light Bulb, Trunk or Cargo Area Light
This 2008 BMW X6 bulb size guide helps you verify the correct bulbs by lighting position before you buy replacements. Whether you are changing a headlight, interior lamp, or exterior signal bulb, matching the bulb to the right location is the easiest way to avoid fitment mistakes.
The 2008 BMW X6 uses several different bulb types depending on the lamp position, and some trims or lighting packages can change the setup. Use this page as a position-by-position reference for common bulb sizes on the X6, including exterior, cabin, cargo, and accent lighting.
Fitment can vary by trim, market, and body style, so always compare the bulb in your vehicle with the listing before ordering. Some positions may use halogen bulbs, while others may be equipped with LED units or LED-style replacements, and aftermarket conversions can change the required bulb type or connector compatibility. If your X6 has been modified, the safest approach is to check the installed bulb number and the lamp housing before purchase, especially for headlights, fog lights, and courtesy lighting.
The listed headlight bulb for both high beam and low beam is D1S. This applies to the 2008 BMW X6 page, but always confirm your headlamp setup because lighting packages can differ.
The front fog light bulb is listed as H11 LED or H16 LED. The correct choice depends on the exact lamp configuration, so check the bulb already installed in your vehicle.
The license plate light bulb is 6418. This is a common exterior fitment point and is usually straightforward to replace once the lens is removed.
Both the front parking light bulb and the front side marker light bulb are listed as 2827. Using the correct bulb size helps keep the front lighting even and consistent.
The front turn signal light bulb is 5200. If you are replacing turn signals, make sure the new bulb matches the original base and output type.
Both the rear turn signal light bulb and the back up reverse light bulb are listed as 64136. Check the rear lamp assembly carefully, since some vehicles may have different lamp layouts by market.
The brake light bulb is 7506R. If your brake light is dim or out, replacing it with the correct bulb size is the first step before checking wiring or the socket.
The page lists the center high mount stop light bulb as LED and the tail light bulb as LED. Because these are LED units, replacement may involve the full module rather than a simple standard bulb swap.
The dome light bulb, map light bulb, and trunk or cargo area light are all listed as 2886X. This makes it easier to replace several interior lights with the same bulb size.
The glove box light bulb, interior door light bulb, stepwell light bulb, and one courtesy light option are listed as 2825, 98. Another courtesy light option is listed separately as 6411, 6428, so check which version your X6 uses.
The vanity mirror light bulb is listed as 6411, 6428. This is a useful size to verify before ordering, since vanity lamps are often overlooked during maintenance.
The 2008 BMW X6 can have different courtesy light setups depending on trim, package, and market. That is why the page shows both 2825, 98 and 6411, 6428 as separate courtesy light options.
Yes, many positions can be upgraded to LED replacements, but fitment and warning-free operation depend on the lamp location and vehicle configuration. Always confirm the bulb size, polarity, and any required load handling before converting.
Check the installed bulb number, the socket shape, and the lamp location on the vehicle. Because trim and lighting package differences can change the fitment, comparing the old bulb to the listing is the best way to avoid ordering the wrong part.