
Marsauto M1C H11 LED Fog Light Bulbs, 30000LM 6000K Cool ...
$17.99
Buy on Amazon →
Used for: Fog Light Bulb Front
Used for: Fog Light Bulb Front
Used for: Headlight Bulb High Beam and Low Beam
Used for: Back Up Reverse Light Bulb, Turn Signal Light Bulb Rear
Used for: Brake Light Bulb
Used for: License Plate Light Bulb
Used for: Parking Light Bulb, Side Marker Light Bulb Front
Used for: Stepwell Light Bulb
Used for: Stepwell Light Bulb
Used for: Turn Signal Light Bulb Front
This 2009 BMW X6 bulb size page is designed to help you verify the correct light bulb by lighting position, so you can match the right part before you buy. Because the X6 could be equipped with different lighting setups depending on trim, market, and body style, checking the bulb chart by location is the safest way to confirm fitment.
Use this guide to identify common exterior and interior bulb positions on the 2009 BMW X6, including headlights, fog lights, parking lights, side markers, license plate lights, brake lights, reverse lights, and stepwell lighting. Matching the bulb to the exact position helps reduce guesswork and makes replacement faster and easier.
Fitment on the 2009 BMW X6 can vary with trim package, factory lighting options, and whether the vehicle uses halogen or LED equipment in a given location. Some owners also upgrade to aftermarket LED replacements, but not every conversion will work correctly without the right bulb type, polarity, or load handling. Before ordering, it is smart to check the bulb currently installed in your vehicle and compare it with the chart, especially for positions that may differ by market or lighting package. If you are replacing a bulb with an LED upgrade, make sure the new bulb matches the socket and is suitable for the housing to avoid warning lights, uneven beam patterns, or fitment issues.
The chart lists D1S for the headlight bulb high beam and low beam on the 2009 BMW X6. This is the key bulb type to verify first if you are replacing the main headlamps.
Front fog light fitment is listed as H11 LED or H16 LED. Because the chart shows both, you should confirm which version is installed on your specific X6 before buying a replacement.
The license plate light bulb is listed as 6418. This is a common exterior bulb position and is usually straightforward to replace once you confirm the socket style.
The front parking light bulb is listed as 2827. Always confirm the installed bulb if your X6 has had previous lighting changes or aftermarket parts installed.
The front side marker light bulb is also listed as 2827. On this model, the parking light and front side marker light use the same bulb size in the chart.
The front turn signal light bulb is listed as 5200. If the signal is dim, fast flashing, or out, checking this bulb size is a good first step.
The brake light bulb is listed as 7506R. Make sure you are replacing the correct rear lamp position, since the X6 rear lighting layout can include multiple bulb types.
Both the rear turn signal light bulb and the back up reverse light bulb are listed as 64136. That makes it especially important to identify the exact lamp position before ordering.
The center high mount stop light bulb is listed as LED. If that lamp is not working, confirm whether the issue is the LED unit itself, the housing, or the vehicle wiring.
The tail light bulb is listed as LED. On LED-equipped rear lamps, the bulb may be part of the lamp assembly rather than a traditional replaceable bulb in every case.
The stepwell light bulb sizes listed are 2825 and 98. These interior courtesy-style lights can vary by trim, so checking the installed bulb is helpful before purchase.
Because the 2009 BMW X6 can differ by market, trim, and lighting package, the installed bulb is the best confirmation of fitment. This is especially important for fog lights, rear lighting, and any LED or aftermarket conversion.