
Marsauto M1C H11 LED Fog Light Bulbs, 30000LM 6000K Cool ...
$17.99
Buy on Amazon →
Used for: Fog Light Bulb Front
Used for: Fog Light Bulb Front
Used for: Headlight Bulb High Beam and Low Beam
Used for: Back Up Reverse Light Bulb, Turn Signal Light Bulb Rear
Used for: Brake Light Bulb
Used for: License Plate Light Bulb
Used for: Parking Light Bulb, Side Marker Light Bulb Front
Used for: Stepwell Light Bulb, Courtesy Light Bulb(Compare to original - Option 1), Glove Box Light Bulb, Interior Door Light Bulb
Used for: Stepwell Light Bulb, Courtesy Light Bulb(Compare to original - Option 1), Glove Box Light Bulb, Interior Door Light Bulb
Used for: Turn Signal Light Bulb Front
Used for: Courtesy Light Bulb(Compare to original - Option 2), Vanity Mirror Light Bulb
Used for: Courtesy Light Bulb(Compare to original - Option 2), Vanity Mirror Light Bulb
Used for: Dome Light Bulb, Map Light Bulb, Trunk or Cargo Area Light
This 2012 BMW X6 bulb size guide helps you verify the correct bulbs by lighting position, so you can match the right part before ordering. Because the X6 could be equipped differently depending on market, trim, and lighting package, checking the exact lamp location is the safest way to confirm fitment.
Use this page to compare exterior and interior bulb types for the 2012 BMW X6, including headlights, fog lights, parking lights, turn signals, reverse lights, and cabin lamps. It is especially useful when replacing a single bulb or planning a full lighting refresh with OEM-style or LED replacements.
Fitment can vary on the 2012 BMW X6, especially between halogen and LED-equipped vehicles and across different trim or package combinations. If you are considering aftermarket LED conversions, make sure the bulb base, polarity, and housing depth are compatible, since some lamps may need resistors or adapters to avoid warning messages or poor beam patterns. Before buying, compare the installed bulb to the listing on this page and, when possible, remove the old bulb to confirm the exact type, because the same model year can use different bulbs in different positions.
The listed headlight bulb for both high beam and low beam is D1S. This applies to the 2012 BMW X6 on this page, but you should still confirm the installed setup if your vehicle has been modified or uses a different lighting package.
The front fog light bulb options shown are H11 LED and H16 LED. The correct choice depends on the specific fog lamp housing fitted to your X6, so checking the existing bulb or connector is recommended before ordering.
The license plate light bulb is 6418. If one side is out, it is usually best to replace both license plate bulbs at the same time for even color and brightness.
Both the front parking light bulb and the front side marker light bulb are listed as 2827. These are separate locations, but they use the same bulb type on this page.
The front turn signal light bulb is 5200. Always verify the socket and lamp style if your X6 has been altered with aftermarket lighting parts.
Both the rear turn signal light bulb and the back up reverse light bulb are listed as 64136. That makes it important to confirm the exact rear lamp position before replacing the bulb.
The brake light bulb is 7506R. If you are replacing a brake lamp, check both sides and inspect the housing for moisture or heat damage as well.
The dome light bulb, map light bulb, and trunk or cargo area light are all listed as 2886X. These interior bulbs are often replaced together when one starts dimming or failing.
The glove box light bulb, interior door light bulb, stepwell light bulb, and courtesy light bulb option 1 are listed as 2825, 98. The page also shows courtesy light bulb option 2 as 6411, 6428, so the exact fit depends on the lamp location and original equipment.
The vanity mirror light bulb is listed as 6411, 6428. If your visor lamp has been changed before, compare the installed bulb to the original to make sure you choose the correct version.
Yes, the page lists LED for the center high mount stop light bulb and tail light bulb. Some other positions may still use traditional halogen or incandescent-style bulbs, so it is best to check each location individually.
Because trim and lighting package differences can change bulb fitment, even on the same model year. Checking the installed bulb helps avoid ordering the wrong base, wrong LED style, or the wrong version for a specific housing.