
PIAA 19618 Xtreme White Plus
Buy on Amazon →
Used for: Headlight Bulb High Beam and Low Beam(with halogen headlights)
Used for: Headlight Bulb High Beam and Low Beam(with HID headlights)
Used for: Back Up Reverse Light Bulb
Used for: Brake Light Bulb, Tail Light Bulb
Used for: License Plate Light Bulb
Used for: License Plate Light Bulb
Used for: Parking Light Bulb, Turn Signal Light Bulb Front
Used for: Side Marker Light Bulb Front
Used for: Side Marker Light Bulb Rear
Used for: Turn Signal Light Bulb Rear
Used for: Courtesy Light Bulb, Glove Box Light Bulb
Used for: Courtesy Light Bulb, Glove Box Light Bulb
Used for: Dome Light Bulb, Interior Door Light Bulb, Map Light Bulb, Trunk or Cargo Area Light
This page helps you verify bulb sizes for the 2007 Chrysler Pacifica by lighting position, so you can match the correct bulb to the exact lamp on the vehicle. Because Chrysler used different lighting setups depending on trim, market, and body style, checking the position first is the safest way to avoid ordering the wrong replacement.
For the 2007 Chrysler Pacifica, common exterior and interior bulb sizes include H13 for halogen headlight setups, D1S for HID headlight setups, 3157R for the brake and tail lights, 3157 for the rear turn signal, 4157NA for the front turn signal and parking light, and several interior bulbs such as 578, 194, 7441, 921, 168, and 168NA. Use the bulb chart on this page as a quick reference before buying replacements.
Fitment can vary by trim package, lighting option, and even market, so always compare the installed bulb to the listing before purchasing. If your Pacifica has halogen headlights, it uses a different bulb type than HID-equipped models, and aftermarket LED conversions may require additional parts or may not fit the housing correctly. For the best result, remove the old bulb and confirm the base style, connector, and wattage before ordering, especially for exterior lamps where a small variation can change the fit.
The 2007 Chrysler Pacifica uses H13 bulbs for high beam and low beam on models with halogen headlights. Vehicles equipped with HID headlights use D1S bulbs instead.
Check the headlight housing and the bulb already installed. Halogen systems use H13 bulbs, while HID-equipped models use D1S. If you are unsure, confirm by looking at the original bulb or the vehicle’s lighting package.
The brake light bulb for the 2007 Chrysler Pacifica is 3157R.
The tail light bulb is also 3157R on this vehicle.
The rear turn signal bulb is 3157.
Both the front turn signal light and the parking light use 4157NA bulbs.
The back up reverse light bulb is 921.
The license plate light bulbs can be 168 or 917, depending on the exact lamp setup.
Interior bulbs on this page include 578 for the dome light, map light, trunk or cargo area light, and interior door light. The glove box light and courtesy light use 194 or 7441.
The front side marker light bulb is 194NA.
The rear side marker light bulb is 168NA.
This page lists the center high mount stop light as LED, so it may not use a standard replaceable bulb in the same way as other lamps.
Yes, many owners choose LED replacements for interior or exterior lights, but fitment and compatibility can vary. Make sure the LED matches the bulb base and works properly in the housing before final installation.
Because trim, lighting package, and market differences can change the bulb used in a specific position. Checking the installed bulb helps confirm the exact fit and avoids ordering the wrong part.