
Marsauto M1C H11 LED Fog Light Bulbs, 30000LM 6000K Cool ...
$17.99
Buy on Amazon →
Used for: Fog Light Bulb Front
Used for: Headlight Bulb High Beam, Headlight Bulb Low Beam(with projector-type headlights)
Used for: Headlight Bulb Low Beam(with HID headlights)
Used for: Headlight Bulb Low Beam(without projector-type headlights)
Used for: Back Up Light Bulb
Used for: Brake Light Bulb, Tail Light Bulb Outer
Used for: Side Marker Light Bulb Front, Side Marker Light Bulb Rear
Used for: Tail Light Bulb Inner
Used for: Turn Signal Light Bulb Front
Used for: Turn Signal Light Bulb Rear
The 2020 Chrysler Pacifica uses different bulb sizes depending on the lighting setup, trim, and market, so this page is designed to help you verify the correct bulb by lighting position before you buy. Whether you are replacing a headlight, brake light, turn signal, or back up light, matching the bulb to the exact location is the safest way to avoid fitment mistakes.
For this year and model, the Pacifica may use 9005, D3S, H11, 7440, 7443A, 7443R, 2821, 64132, and 2825R bulbs in different positions. That means the same vehicle can have more than one valid bulb type depending on whether it has projector headlights, HID headlights, or a different front lighting package.
Before ordering replacement bulbs, check the installed bulb and confirm the lighting style on your van. Trim level, factory package, and body style can change the fitment, and halogen and LED setups are not always interchangeable. If your Pacifica has been converted with aftermarket LED bulbs or retrofit parts, the bulb listed on the vehicle may not match the original factory specification. For the best result, inspect the old bulb, compare the connector and base shape, and make sure the replacement matches both the bulb number and the housing type before purchase.
It depends on the headlight design. The 2020 Chrysler Pacifica may use 9005 for the high beam, 9005 for low beam with projector-type headlights, D3S for low beam with HID headlights, or H11 for low beam without projector-type headlights.
No. Low beam fitment varies by headlight package. Some versions use 9005, some use D3S, and others use H11, so you should verify the exact headlight type before buying.
The front fog light bulb listed for this model is H11 LED.
The rear turn signal bulb size listed is 7443A.
The brake light bulb listed for the 2020 Chrysler Pacifica is 7443R.
The outer tail light bulb listed for this model is 7443R.
The inner tail light bulb listed is 2825R, and it may be optional depending on the lighting setup.
The front side marker light bulb listed for the 2020 Pacifica is 2821.
The rear side marker light bulb listed for the 2020 Pacifica is also 2821.
The front turn signal light bulb listed is 64132.
The back up light bulb listed for this model is 7440.
Sometimes, but not always with a simple bulb swap. LED conversions can affect beam pattern, warning messages, and fitment, especially in headlight housings designed for halogen or HID bulbs.
Because trim, lighting package, and market can change the bulb type. Two Pacifica vans from the same year may use different bulbs if one has projector headlights, HID headlights, or a different factory lighting configuration.
Check the exact bulb position, inspect the installed bulb, and confirm whether your Pacifica has halogen, HID, projector, or LED lighting. Matching the bulb base and housing type is just as important as matching the bulb number.