PIAA 19618 Xtreme White Plus
Buy on Amazon →
Chrysler Pacifica 2008 Bulb Size
Bulb size chart
Headlight Bulb High Beam and Low Beam(with halogen headlights) - H13
Headlight Bulb High Beam and Low Beam(with HID headlights) - D1S
Back Up Reverse Light Bulb - 921
Brake Light Bulb - 3157R
Center High Mount Stop Light Bulb - LED
License Plate Light Bulb - 168, 917
Parking Light Bulb - 4157NA
Side Marker Light Bulb Front - 194NA
Side Marker Light Bulb Rear - 168NA
Tail Light Bulb - 3157R
Turn Signal Light Bulb Front - 4157NA
Turn Signal Light Bulb Rear - 3157
H13 Bulbs
Used for: Headlight Bulb High Beam and Low Beam(with halogen headlights)
D1S Bulbs
Used for: Headlight Bulb High Beam and Low Beam(with HID headlights)
921 Bulbs
Used for: Back Up Reverse Light Bulb
3157R Bulbs
Used for: Brake Light Bulb, Tail Light Bulb
168 Bulbs
Used for: License Plate Light Bulb
917 Bulbs
Used for: License Plate Light Bulb
4157NA Bulbs
Used for: Parking Light Bulb, Turn Signal Light Bulb Front
194NA Bulbs
Used for: Side Marker Light Bulb Front
168NA Bulbs
Used for: Side Marker Light Bulb Rear
3157 Bulbs
Used for: Turn Signal Light Bulb Rear
This 2008 Chrysler Pacifica bulb size page helps you verify the correct bulbs by lighting position, so you can replace a failed lamp with the right fit the first time. Because the Pacifica could be equipped with different lighting setups, it is always smart to match the bulb to the exact location on the vehicle before ordering.
Use this guide to check common exterior lighting points such as headlights, tail lights, brake lights, turn signals, side markers, license plate lights, and the center high mount stop light. The listed bulb sizes are organized to make replacement easier for both halogen and HID-equipped models.
Fitment can vary by trim, lighting package, market, and body style, so the same 2008 Chrysler Pacifica may not use the same bulb in every position. Halogen and HID headlight systems also use different bulbs, and aftermarket LED conversions may change the bulb type or require additional parts for proper operation. Before buying, compare the installed bulb in your vehicle, confirm the socket shape, and check for any markings on the old bulb to avoid a mismatch.
FAQ
What bulb does the 2008 Chrysler Pacifica use for the halogen headlight assembly?
For 2008 Chrysler Pacifica models with halogen headlights, the headlight bulb size is H13 for both high beam and low beam use.
What bulb is used in Pacifica models with HID headlights?
For 2008 Chrysler Pacifica models equipped with HID headlights, the headlight bulb size is D1S.
What is the rear turn signal bulb size on a 2008 Chrysler Pacifica?
The rear turn signal bulb size listed for the 2008 Chrysler Pacifica is 3157.
What bulb fits the front turn signal and parking light positions?
The front turn signal bulb size is 4157NA, and the parking light bulb size is also 4157NA on this page.
What bulb is used for the brake lights and tail lights?
The brake light bulb and tail light bulb are both listed as 3157R for the 2008 Chrysler Pacifica.
What bulb fits the back up reverse lights?
The back up reverse light bulb size listed for this vehicle is 921.
What bulb is used for the license plate lights?
The license plate light bulb sizes listed are 168 and 917.
What bulb fits the front side marker light?
The front side marker light bulb size is 194NA.
What bulb fits the rear side marker light?
The rear side marker light bulb size is 168NA.
What bulb does the center high mount stop light use?
The center high mount stop light is listed as LED on this page, so the exact replacement may depend on the lamp design rather than a simple replaceable standard bulb.
Why should I verify bulb size by lighting position on this model?
The 2008 Chrysler Pacifica uses different bulb sizes in different locations, so a bulb that fits one lamp, such as the rear turn signal, may not fit the front marker or headlight position.
Can trim level or market affect the bulb size on a 2008 Chrysler Pacifica?
Yes. Trim, lighting package, market, and body style can change the bulb used in certain positions, especially headlights and rear lighting.
Should I check the old bulb before ordering replacements?
Yes. Checking the installed bulb before purchase is one of the best ways to confirm fitment, especially if the vehicle has been modified or if the lighting package is not standard.
Are LED replacement bulbs always a direct fit on this vehicle?
Not always. Aftermarket LED bulbs may fit the socket but still need proper polarity, space, or additional components to work correctly without warning messages or beam issues.