
PIAA 19618 Xtreme White Plus
Buy on Amazon →
Used for: Headlight Bulb High Beam and Low Beam
Used for: Back Up Reverse Light Bulb
Used for: Brake Light Bulb, Tail Light Bulb
Used for: License Plate Light Bulb
Used for: License Plate Light Bulb
Used for: Parking Light Bulb, Turn Signal Light Bulb Front Inner
Used for: Turn Signal Light Bulb Front Outer
Used for: Turn Signal Light Bulb Rear
Used for: Automatic Transmission Indicator Light Bulb, Instrument Panel Light Bulb
Used for: Dome Light Bulb, Map Light Bulb
Used for: Trunk or Cargo Area Light
This 2008 Dodge Caliber bulb size guide is designed to help you quickly verify the correct bulbs by lighting position. Whether you are replacing a headlight, tail light, interior lamp, or a small dash bulb, matching the bulb to the exact location is the easiest way to avoid buying the wrong part.
Because trim and lighting equipment can vary by market and body style, the same 2008 Dodge Caliber may use different bulbs in different positions. Use the chart on this page to confirm the bulb size for each light before ordering replacements.
For the best fit, compare your vehicle’s installed bulb with the listing for your exact lighting position, especially if your Caliber has a different trim package or was built for a specific market. Halogen bulbs and LED replacements are not always direct swaps, so make sure the base type, shape, and electrical load are compatible before converting. Aftermarket LED upgrades can improve brightness, but they may require additional parts or may not fit the housing the same way as the original halogen bulb. If you are unsure, remove the old bulb first and check the number printed on the base before purchasing.
The 2008 Dodge Caliber uses an H13 bulb for both the high beam and low beam headlight positions listed on this page.
The front outer turn signal bulb is listed as 2827 for the 2008 Dodge Caliber.
The front inner turn signal bulb is listed as 3157A.
The rear turn signal bulb is listed as 3157 for the 2008 Dodge Caliber.
Both the brake light and tail light bulb positions are listed as 3157R on this vehicle.
The back up reverse light bulb is listed as 921.
The license plate light bulbs are listed as 2825 and 98.
Both the dome light and map light use a 578 bulb on the 2008 Dodge Caliber.
The trunk or cargo area light bulb is listed as 212-2.
Both the automatic transmission indicator light and the instrument panel light are listed as 37 bulbs.
Not always. Trim level, lighting package, market, and body style can change the bulb used in some positions, so it is best to confirm the exact location on your vehicle.
In some positions, yes, but fitment and compatibility can vary. LED replacements may need to match the original base and may not work correctly without the right electrical setup.
Yes. Checking the installed bulb is one of the safest ways to confirm fitment, especially if your Caliber has been modified or if you are replacing a bulb from a different trim package.