
PIAA 19618 Xtreme White Plus
Buy on Amazon →
Used for: Headlight Bulb High Beam and Low Beam
Used for: Back Up Reverse Light Bulb
Used for: Brake Light Bulb, Tail Light Bulb
Used for: License Plate Light Bulb
Used for: License Plate Light Bulb
Used for: Parking Light Bulb, Side Marker Light Bulb Front, Turn Signal Light Bulb Front
Used for: Turn Signal Light Bulb Rear
Used for: Dome Light Bulb, Map Light Bulb
Used for: Trunk or Cargo Area Light
This page helps you find the correct bulb sizes for the 2010 Dodge Caliber by lighting position, so you can match the right bulb to the right socket before you buy. Use it as a quick reference for headlights, tail lamps, interior lights, and other exterior bulbs on this model.
The 2010 Dodge Caliber uses several different bulb types depending on where the light is located. Checking by position is the easiest way to verify fitment and avoid confusion between similar-looking bulbs, especially when replacing a single failed bulb or upgrading multiple lights at once.
Fitment can vary by trim, lighting package, market, and body style, so always compare the bulb listed for your exact position with the bulb already installed in your vehicle. Some Caliber models may use halogen bulbs, while others may have LED components in certain locations, and aftermarket LED conversions can require additional compatibility checks for beam pattern, polarity, or warning issues. Before ordering, remove the old bulb and confirm the base style and connector shape whenever possible, since that is the safest way to avoid a mismatch. This is especially helpful for exterior lighting, where a bulb that physically fits may still not perform correctly if the output or design is different from the original setup.
The 2010 Dodge Caliber uses an H13 bulb for both the high beam and low beam headlight positions.
The front turn signal bulb is listed as 3157A for the 2010 Dodge Caliber.
The parking light bulb for the 2010 Dodge Caliber is 3157A.
The front side marker light bulb is 3157A on the 2010 Dodge Caliber.
The rear turn signal bulb is listed as 3157 for the 2010 Dodge Caliber.
Both the brake light bulb and tail light bulb are listed as 3157R for the 2010 Dodge Caliber.
The back up reverse light bulb is 921 for the 2010 Dodge Caliber.
The license plate light bulb is listed as 2825 or 98 for the 2010 Dodge Caliber.
Both the dome light and map light use a 578 bulb on the 2010 Dodge Caliber.
The center high mount stop light is listed as LED on this page, so it is not shown as a standard replaceable bulb number.
The trunk or cargo area light uses a 212-2 bulb, if your 2010 Dodge Caliber is equipped with that light.
Because trim level, lighting package, and market differences can change the bulb used in a specific position, and checking the installed bulb helps confirm the exact fit before purchase.
Yes, many owners upgrade to LED, but you should confirm fitment, polarity, and light output before buying, since some positions may need compatible bulbs or additional hardware.
Not always. The bulb chart is a strong guide, but trim, body style, and equipment can affect certain lighting positions, so it is best to verify by location on your specific vehicle.