
PIAA 19618 Xtreme White Plus
Buy on Amazon →
Used for: Headlight Bulb High Beam and Low Beam
Used for: Back Up Reverse Light Bulb
Used for: Brake Light Bulb, Tail Light Bulb
Used for: License Plate Light Bulb
Used for: License Plate Light Bulb
Used for: Parking Light Bulb, Side Marker Light Bulb Front, Turn Signal Light Bulb Front
Used for: Turn Signal Light Bulb Rear
Used for: Dome Light Bulb, Map Light Bulb
Used for: Trunk or Cargo Area Light
This page covers bulb sizes for the 2009 Dodge Caliber and is organized by lighting position so you can quickly verify the correct replacement before you buy. Whether you are changing a headlight, tail light, dome light, or license plate bulb, matching the bulb to the right location helps avoid guesswork.
The 2009 Dodge Caliber uses a mix of common halogen bulbs and smaller interior and exterior lamps, and some positions may vary by trim, market, or body style. Use the chart on this page as a practical reference for the most common bulb fitments on this model year.
For the best fitment results, compare the bulb listed here with the one already installed in your vehicle before ordering, especially if your Caliber has a different trim or lighting package. Some owners choose LED replacements for brighter output or longer life, but halogen-to-LED conversions may require attention to beam pattern, polarity, and local regulations. If you are replacing an aftermarket assembly or a modified lamp, confirm that the socket and bulb type still match the original specification before installation.
The 2009 Dodge Caliber uses an H13 bulb for both the high beam and low beam headlight positions.
The front turn signal bulb listed for the 2009 Dodge Caliber is 3157A.
The parking light bulb for the 2009 Dodge Caliber is 3157A.
The front side marker light bulb listed for this year is 3157A.
The rear turn signal bulb for the 2009 Dodge Caliber is 3157.
Both the brake light and tail light positions use a 3157R bulb on the 2009 Dodge Caliber.
The back-up reverse light bulb listed for this model year is 921.
The license plate light bulb sizes listed are 2825 and 98.
Both the dome light and map light use a 578 bulb on the 2009 Dodge Caliber.
The center high mount stop light is listed as LED, so it may not use a standard replaceable halogen bulb in the same way as other positions.
The trunk or cargo area light uses a 212-2 bulb, when equipped.
Yes. Trim level, lighting package, market, and body style can affect bulb fitment, so it is smart to verify the installed bulb before purchasing replacements.
LED replacements can work well in some positions, but fitment, brightness, beam pattern, and legality can vary. Make sure the LED matches the socket and performs correctly in the housing.
Check the bulb currently installed in the vehicle, compare the socket shape and printed bulb number, and match it to the position on the chart for your 2009 Dodge Caliber.