PIAA 19618 Xtreme White Plus
Buy on Amazon →
Dodge Nitro 2007 Bulb Size
Bulb size chart
Headlight Bulb High Beam and Low Beam - H13
Back Up Reverse Light Bulb - 4057
Brake Light Bulb - 4057R
Center High Mount Stop Light Bulb - 921
License Plate Light Bulb - 168, 917
Parking Light Bulb - 3157A
Side Marker Light Bulb Front - 168NA
Side Marker Light Bulb Rear - 4057
Tail Light Bulb - 4057R
Turn Signal Light Bulb Front - 3157A
Turn Signal Light Bulb Rear - 4057
Ash Tray Light Bulb - 161
Courtesy Light Bulb - 906
Dome Light Bulb - 578
HVAC Temperature Control Bulb - 2721
Instrument Panel Light Bulb - 103
Map Light Bulb - 578
Trunk or Cargo Area Light - 578
H13 Bulbs for Nitro
4057 Bulbs for Nitro
4057R Bulbs for Nitro
921 Bulbs for Nitro
168 Bulbs for Nitro
917 Bulbs for Nitro
3157A Bulbs for Nitro
168NA Bulbs for Nitro
161 Bulbs for Nitro
906 Bulbs for Nitro
578 Bulbs for Nitro
2721 Bulbs for Nitro
103 Bulbs for Nitro
This 2007 Dodge Nitro bulb size guide helps you verify the correct replacement bulb by lighting position, so you can match the right part before you buy. Use it to check exterior, interior, and dashboard bulbs one by one instead of guessing by appearance alone.
The 2007 Dodge Nitro can use different bulb setups depending on trim, market, and lighting package, so the safest approach is to confirm the bulb size for each socket on your vehicle. This page organizes the common bulb positions to make headlight, tail light, marker light, and cabin light replacement easier.
For the best fitment results, compare the bulb size on this page with the bulb already installed in your Nitro, especially if your SUV has been modified or uses a different trim package. Halogen bulbs and LED replacements do not always fit or function the same way, and some aftermarket LED conversions may need extra resistors, adapters, or a different beam pattern to work properly. If you are replacing a burned-out bulb, check the base style, connector shape, and physical length before ordering, since a bulb can look similar but still be the wrong fit. When in doubt, remove the old bulb and verify the marking on the glass or base before purchase.
FAQ
What bulb size does the 2007 Dodge Nitro use for the headlights?
The 2007 Dodge Nitro uses H13 bulbs for both the high beam and low beam headlight positions listed on this page.
What is the rear brake light bulb size on a 2007 Dodge Nitro?
The rear brake light bulb is listed as 4057R for the 2007 Dodge Nitro.
What bulb fits the tail lights on this vehicle?
The tail light bulb is listed as 4057R for the 2007 Dodge Nitro.
What size is used for the rear turn signal and reverse light?
Both the rear turn signal light and the back up reverse light are listed as 4057 on this page.
What bulb is used for the front turn signal and parking light?
The front turn signal light bulb and the parking light bulb are both listed as 3157A.
What bulb fits the front side marker light?
The front side marker light bulb is listed as 168NA for the 2007 Dodge Nitro.
What bulb does the center high mount stop light use?
The center high mount stop light bulb is listed as 921.
What are the license plate light bulb options?
The license plate light bulb is listed with two options: 168 and 917.
Which bulbs are used for the dome, map, and cargo lights?
The dome light bulb, map light bulb, and trunk or cargo area light are all listed as 578.
What bulb fits the courtesy light?
The courtesy light bulb is listed as 906.
What bulb is used for the instrument panel lighting?
The instrument panel light bulb is listed as 103.
What bulb fits the HVAC temperature control light?
The HVAC temperature control bulb is listed as 2721.
What bulb is used for the ash tray light?
The ash tray light bulb is listed as 161.
Why should I check my trim before ordering bulbs for a 2007 Dodge Nitro?
Trim and lighting package differences can change the bulb setup, so checking your exact Nitro helps avoid ordering the wrong size for a specific position.
Can I replace the factory bulbs with LEDs?
Yes, many positions can be converted to LED, but fitment, polarity, brightness, and error-free operation can vary. Some LED upgrades may need additional parts to work correctly.