
PIAA 19618 Xtreme White Plus
Check Price on Amazon →
This 2008 Dodge Nitro bulb size guide helps you verify the correct replacement bulb by lighting position, so you can match the right part to the right lamp before you buy. Because the Nitro could be equipped with different trim levels and lighting packages, checking the bulb chart by location is the safest way to confirm fitment.
Use this page to look up common exterior and interior bulbs for the 2008 Dodge Nitro, including headlights, turn signals, brake lights, reverse lights, dome lights, map lights, and instrument panel bulbs. Matching the bulb to the exact position is especially important on this model, since several sockets use different sizes even when the lamps look similar from the outside.
Fitment can vary by trim, market, and body style, so it is smart to compare the bulb in your vehicle before ordering. The 2008 Dodge Nitro was originally equipped with halogen bulbs in many positions, but some owners choose LED replacements for brighter output or longer life. If you are converting to aftermarket LED bulbs, check for polarity, beam pattern, and possible hyperflash on turn signals. For the most reliable result, remove the installed bulb and compare the number on the base, the socket shape, and the physical length before purchase.
The 2008 Dodge Nitro uses an H13 bulb for both the high beam and low beam headlight positions.
The front turn signal light bulb is listed as 3157A for the 2008 Dodge Nitro.
The front parking light bulb is also listed as 3157A on the 2008 Dodge Nitro.
Both the rear turn signal light and the back up reverse light use 4057 bulbs on this vehicle.
The brake light bulb is listed as 4057R for the 2008 Dodge Nitro.
The tail light bulb is listed as 4057R on this model.
The license plate light bulb can be either 168 or 917, depending on the exact lamp setup.
The dome light bulb, map light bulb, and trunk or cargo area light bulb are all listed as 578.
The courtesy light bulb is listed as 906.
The instrument panel light bulb is listed as 103.
No. The front side marker light bulb is listed as 168NA, while the rear side marker light bulb is listed as 4057.
Not always. Trim and lighting package can vary by market and body style, so it is best to confirm the bulb by position and compare the installed bulb before ordering.
Yes, many positions can be converted to LED, but you should check fitment, polarity, brightness, and possible warning or flash-rate issues before buying.
Check the bulb number, socket shape, and the exact lamp position on the vehicle. If possible, remove the old bulb and compare it directly to the replacement.