
PIAA 19618 Xtreme White Plus
Check Price on Amazon →
This page helps you verify the bulb sizes for the 2009 Dodge Nitro by lighting position, so you can match the right replacement to the right socket. Whether you are changing a headlight, tail lamp, interior light, or a small dash bulb, checking the location first helps avoid ordering the wrong part.
The 2009 Dodge Nitro uses several different bulb types across the exterior and interior lighting system. Trim level, market, and lighting package can change what is installed, so use the bulb chart on this page as a position-by-position reference before you buy replacements.
For the best fitment, compare your vehicle’s trim and equipment with the bulb list before ordering, especially if your Nitro has different lighting packages or was built for a different market. Halogen and LED replacements are not always direct swaps, and some aftermarket conversions may need extra resistors, adapters, or housings to work correctly. If you are unsure, remove the installed bulb and check the number printed on the base before purchasing a new one, since that is the most reliable way to confirm fitment.
The 2009 Dodge Nitro uses an H13 bulb for both the high beam and low beam headlights.
The front turn signal light bulb is listed as 3157A for the 2009 Dodge Nitro.
The front parking light bulb is also listed as 3157A on this model year.
Both the rear turn signal light and the back up reverse light use a 4057 bulb on the 2009 Dodge Nitro.
The brake light bulb is listed as 4057R.
The tail light bulb is listed as 4057R for the 2009 Dodge Nitro.
The license plate light bulb can be either 168 or 917, depending on the exact setup.
The dome light, map light, and trunk or cargo area light are all listed as 578 bulbs.
The courtesy light bulb is listed as 906.
The center high mount stop light bulb is listed as 921.
The instrument panel light bulb is listed as 103.
The HVAC temperature control bulb is listed as 2721.
Yes. Trim, lighting package, body style, and market can affect the exact bulb used, so it is important to confirm the position on your specific vehicle.
Yes. Checking the installed bulb is one of the easiest ways to confirm the correct fit, especially if your Nitro has been modified or uses an optional lighting package.