
AUTOONE 9006/HB4 LED Bulbs, 70000LM 1200% Ultra Bright, R...
$26.99
Buy on Amazon →
Used for: Fog Light Bulb Front
Used for: Headlight Bulb High Beam, Daytime Running Light Bulb
Used for: Headlight Bulb Low Beam
Used for: Back Up Light Bulb, Center High Mount Stop Light Bulb, Turn Signal Light Bulb Rear
Used for: Brake Light Bulb, Tail Light Bulb
Used for: License Plate Light Bulb
Used for: Parking Light Bulb, Turn Signal Light Bulb Front
Used for: Side Marker Light Bulb Front, Map Light Bulb, Trunk or Cargo Area Light(Compare to original - Option 2)
Used for: Side Marker Light Bulb Rear
Used for: Ash Tray Light Bulb(Compare to original - Option 1), Glove Box Light Bulb
Used for: Ash Tray Light Bulb(Compare to original - Option 2)
Used for: Dome Light Bulb(Compare to original - Option 1)
Used for: Dome Light Bulb(Compare to original - Option 2)
Used for: Trunk or Cargo Area Light(Compare to original - Option 1)
This 2004 Toyota Camry bulb size guide helps you quickly verify the correct bulbs by lighting position, so you can match the right replacement before you buy. Whether you are changing a headlight, interior lamp, or rear signal bulb, this page organizes the common fitment points for the 2004 Camry in one place.
For this model year, the Camry uses different bulb types depending on the lamp location, and some items can vary by market, trim, or body style. Use the chart to confirm the bulb size for each position, including high beam, low beam, turn signal, brake light, dome light, and license plate light applications.
Fitment can vary on the 2004 Toyota Camry based on trim level, lighting package, and whether the car has factory halogen or aftermarket LED upgrades. That is especially important for items like the fog light bulb, headlight bulbs, and interior dome or cargo lamps, where previous owners may have installed non-original parts. If you are replacing a bulb, it is always smart to check the installed bulb number before ordering, compare both sides if one lamp still works, and confirm whether your vehicle uses standard halogen bulbs or an LED conversion that may need an adapter, resistor, or different housing to fit correctly.
The 2004 Toyota Camry uses 9005 bulbs for the high beam and 9006 bulbs for the low beam. These are the main headlight bulb sizes listed for this year.
The daytime running light bulb is 9005 on the 2004 Toyota Camry. This matches the high beam bulb size on the chart.
The front turn signal light bulb is 3457. The same bulb size is also listed for the parking light on this model year.
Both the rear turn signal light and the back up light use 921 bulbs on the 2004 Toyota Camry.
The brake light bulb and tail light bulb are both listed as 3057R for the 2004 Toyota Camry.
The center high mount stop light bulb uses a 921 bulb on this vehicle.
The map light bulb is 168. For the dome light, the page lists two possible fitments depending on the original setup: 578 or DE3175.
The license plate light bulb is 2825. This is the listed bulb size for the license plate lamp on this model year.
The glove box light bulb is 2721. For the ash tray light, the page lists 2721 for one option and 74 for another option.
The front side marker light bulb is 168, and the rear side marker light bulb is 194 on the 2004 Toyota Camry.
The trunk or cargo area light has two listed options on this page: 168 for one setup and DE3021 for another. Check the installed bulb before ordering.
Yes. The front fog light bulb is listed as 9006 LED on this page. If your car has factory fog lights, confirm the housing and connector before choosing a replacement.
Some positions can vary by trim, market, or original equipment package. That is why the page includes alternate bulb sizes for certain interior and cargo lamps on the 2004 Camry.
Yes. Comparing the installed bulb is one of the best ways to avoid fitment mistakes, especially if the car has had previous repairs, aftermarket lighting, or a trim-specific bulb setup.