Used for: Back Up Reverse Light Bulb (with Bi-LED headlights)
Used for: Parking Light Bulb(with Bi-LED headlights), Turn Signal Light Bulb Front(with Bi-LED headlights)
Used for: Side Marker Light Bulb Front(with Bi-LED headlights), Side Marker Light Bulb Rear(with Bi-LED headlights)
Used for: Turn Signal Light Bulb Rear(with Bi-LED headlights)
Used for: Dome Light Bulb
Used for: Interior Door Light Bulb, Trunk or Cargo Area Light
Used for: Interior Door Light Bulb, Trunk or Cargo Area Light
Used for: Vanity Mirror Light Bulb
Used for: Vanity Mirror Light Bulb
This 2020 Toyota Camry bulb size page helps you verify the correct bulbs by lighting position, so you can match the right part to the right lamp before you buy. Because Camry lighting can vary by trim, market, body style, and headlight package, checking the exact position on the vehicle is the safest way to confirm fitment.
Use this page as a quick reference for exterior and interior lighting on the 2020 Toyota Camry. The chart separates items such as headlights, brake lights, license plate lights, turn signals, side markers, reverse lights, and cabin bulbs, making it easier to identify the bulb type needed for each location.
Fitment can differ between trims and lighting packages, especially when comparing LED-equipped models with Bi-LED or other factory setups. Some positions use integrated LED assemblies, while others use replaceable bulbs, and aftermarket conversions can change the bulb type or connector style. Before ordering, check the bulb currently installed in your Camry and compare it with the chart, since the same year may use different bulbs depending on equipment level and market. If your car has been modified with LED replacements or non-OE housings, confirm the physical bulb base and socket before purchase.
The chart lists the headlight bulb high beam and low beam as LED. On this page, the headlight setup is shown as an LED system rather than a replaceable halogen bulb size.
No. The reverse light bulb depends on the headlight package. Camry models with LED headlights list the back up reverse light bulb as LED, while models with Bi-LED headlights list the reverse bulb as 921.
The brake light bulb is listed as LED. That means the brake lamp is shown as an LED-type light on this page rather than a standard replaceable bulb size.
The license plate light bulb is listed as LED. This page treats the license plate lamp as an LED light source for the 2020 Toyota Camry.
For Camry models with LED headlights, the front turn signal light bulb, rear turn signal light bulb, parking light bulb, and both front and rear side marker bulbs are listed as LED.
For Camry models with Bi-LED headlights, the front turn signal light bulb is 7444NA and the rear turn signal light bulb is 7440A. The parking light bulb is 7444NA, and the front and rear side marker bulbs are 168NA.
The trunk or cargo area light uses 168 or 917. Either bulb size may apply depending on the exact trim or installed lamp configuration.
The interior door light bulb is listed as 168 or 917. Check the bulb already installed in the door lamp before ordering a replacement.
The vanity mirror light bulb is listed as 194 or 7441. Because fitment can vary, it is a good idea to confirm the bulb in your car before buying.
The dome light bulb is DE3175. This is the listed bulb size for the interior dome lamp on the 2020 Toyota Camry.
The daytime running light bulb is listed as LED. On this page, the DRL is shown as an LED light source rather than a standard halogen bulb size.
Match the bulb to the exact lighting position on the vehicle, then compare the installed bulb, socket, and headlight package with the chart. Trim and lighting package differences can change the correct bulb size, so checking the existing bulb is the best final step before purchase.
