
Marsauto M1C H11 LED Fog Light Bulbs, 30000LM 6000K Cool ...
$17.99
Buy on Amazon →
Used for: Fog Light Bulb Front
Used for: Fog Light Bulb Front
Used for: Headlight Bulb High Beam, Daytime Running Light Bulb
Used for: Headlight Bulb Low Beam
Used for: Back Up Reverse Light Bulb
Used for: Brake Light Bulb(Base), Tail Light Bulb Outer
Used for: License Plate Light Bulb, Side Marker Light Bulb Front, Map Light Bulb
Used for: License Plate Light Bulb, Side Marker Light Bulb Front, Map Light Bulb
Used for: Parking Light Bulb, Turn Signal Light Bulb Front
Used for: Side Marker Light Bulb Rear(Base)
Used for: Tail Light Bulb Inner, Trunk or Cargo Area Light, Vanity Mirror Light Bulb
Used for: Tail Light Bulb Inner, Trunk or Cargo Area Light, Vanity Mirror Light Bulb
Used for: Turn Signal Light Bulb Rear
Used for: Dome Light Bulb
Used for: Glove Box Light Bulb
Used for: Interior Door Light Bulb
Used for: Interior Door Light Bulb
This 2009 Toyota Camry bulb size guide helps you verify the correct bulbs by lighting position before you buy replacements. Whether you are changing a headlight, brake light, reverse light, or a small interior lamp, matching the bulb to the exact location is the safest way to avoid fitment mistakes.
The Camry’s lighting setup can differ by trim, body style, and market, so the bulb chart on this page is organized by function rather than by a single universal part number. Use it to compare the bulb type for each exterior and interior position on your car, from the low beam and high beam headlights to the license plate and cargo area lights.
For best results, confirm your trim and lighting package before ordering, since some 2009 Camry models use different rear lamp or fog light setups. Halogen and LED bulbs are not always direct swaps, especially in housings designed for a specific beam pattern or resistor load, so aftermarket LED conversions may need extra attention to avoid warning lights, glare, or poor visibility. If you are unsure, remove the installed bulb and compare its base and markings before purchase; that quick check is often the easiest way to confirm the right fit.
The low beam headlight bulb listed for the 2009 Toyota Camry is H11. This is one of the most commonly replaced exterior bulbs on the car.
The high beam headlight bulb is 9005. If you are replacing both sides, it is usually a good idea to change them as a pair.
The back up reverse light bulb is 921. This bulb is used for the rear white reverse lamps.
The front turn signal light bulb is 3457A. Some listings also note the parking light bulb as 3457A, so it is important to match the exact lamp position.
The rear turn signal light bulb is 7440A. Rear lighting can vary by trim and market, so confirm the lamp location before ordering.
Brake light fitment can vary by lamp design. The chart lists Brake Light Bulb - LED and also Brake Light Bulb(Base) - 7443R, so check whether your Camry has the base bulb setup or an LED-equipped lamp.
Tail light fitment also varies by configuration. The chart includes Tail Light Bulb - LED, Tail Light Bulb Outer - 7443R, Tail Light Bulb Inner - 194, 7441, and Side Marker Light Bulb Rear(Base) - 7443A, so verify the exact rear lamp position on your vehicle.
The dome light bulb is DE3175. This is the interior roof light used for cabin illumination.
The map light bulb and license plate light bulb are listed as 2825, 98. The same sizes are also shown for the front side marker light.
The glove box light bulb is 2721. It is a small interior bulb and should be matched carefully to the socket size.
The front fog light bulb is listed as H11 LED or H16 LED. Because fog light fitment can depend on trim and market, check the installed bulb and housing before buying LED replacements.
No. Trim level, body style, and lighting package can change the bulb setup, especially for rear lamps, fog lights, and LED-equipped positions. Always compare the specific bulb location on your car with the chart.
You can, but fitment is not always plug-and-play. LED conversions may need proper aiming, load management, or housing compatibility checks to work well and avoid glare or warning issues.
Check the bulb location on the vehicle, compare it with the chart, and if possible remove the old bulb to read the base code. That is the most reliable way to confirm the correct replacement for your 2009 Toyota Camry.