Used for: Back Up Light Bulb, Back Up Reverse Light Bulb
Used for: License Plate Light Bulb, Side Marker Light Bulb Front
Used for: Parking Light Bulb, Turn Signal Light Bulb Front
Used for: Side Marker Light Bulb Front
Used for: Turn Signal Light Bulb Rear
Used for: Turn Signal Light Bulb Rear
This 2016 Toyota Land Cruiser bulb size page helps you verify the correct bulbs by lighting position, so you can match the right part before you buy. Because the Land Cruiser can use different lighting setups depending on market, trim, and body style, checking each location separately is the safest way to avoid ordering the wrong bulb.
Use this guide when replacing exterior and interior lights such as the headlights, fog lights, brake lights, turn signals, reverse lights, dome lights, map lights, and cargo area lamp. The chart is organized by bulb position, making it easier to confirm what fits the front, rear, and cabin lighting on your 2016 Land Cruiser.
Fitment can vary by trim package, lighting option, and regional specification, so the bulb listed for one 2016 Land Cruiser may not match every vehicle. Some positions use LED assemblies, while others may still use replaceable bulbs such as 921, 168, 168NA, 7444NA, or 7440A/7440 depending on the location and equipment. If your Land Cruiser has been converted to aftermarket LED bulbs or upgraded housings, the physical bulb shape may still matter even when the light output differs. Before ordering, it is smart to inspect the bulb currently installed in the vehicle, compare the base and connector style, and confirm whether your truck uses a factory LED unit or a serviceable bulb.
The headlight high beam and low beam listings on this page are LED. Because the factory setup can vary by market and package, it is best to confirm the exact headlamp assembly on your Land Cruiser before replacing anything.
The front fog light bulb is listed as LED. If your vehicle has a different lighting package or an aftermarket fog lamp assembly, check the installed unit to verify the correct replacement.
The front turn signal light bulb is listed as 7444NA. This is a useful reference when replacing the front signal on a 2016 Toyota Land Cruiser with a bulb-style setup.
The front parking light bulb is listed as 7444NA. On some vehicles, the parking light and front turn signal may use the same bulb family, so position matters when checking fitment.
The rear turn signal light bulb is listed as 7440A or 7440. Since both are shown on the page, confirm which version is installed on your specific Land Cruiser before purchasing.
The back up reverse light bulb is listed as 921. The page also shows back up light bulb 921, which is helpful if your vehicle uses the same bulb type for the rear reverse lamp location.
The front side marker light bulb is listed as 168 or 168NA. Either designation may appear depending on the exact lamp and market specification.
The license plate light bulb is listed as 168. This is one of the more common service bulbs on the 2016 Toyota Land Cruiser.
Yes, the dome light, map light, and trunk or cargo area light are listed as LED on this page. That means the lighting may be integrated or use a specific LED service design depending on the assembly.
Both the brake light bulb and the center high mount stop light bulb are listed as LED. Because these can be part of an LED assembly, verify the exact rear lamp configuration before ordering replacement parts.
Yes, but fitment and performance depend on the lamp position and housing design. Aftermarket LED conversions can change brightness, beam pattern, or warning behavior, so compare the installed bulb and make sure the replacement matches the socket and space available.
Checking the installed bulb is the best way to confirm the correct fit, especially on a vehicle like the 2016 Land Cruiser where trim and lighting package differences can affect bulb type. It helps you avoid returns and ensures you buy the right bulb for the exact lighting position.
