Used for: Back Up Light Bulb, Back Up Reverse Light Bulb
Used for: License Plate Light Bulb, Side Marker Light Bulb Front
Used for: Parking Light Bulb, Turn Signal Light Bulb Front
Used for: Side Marker Light Bulb Front
Used for: Turn Signal Light Bulb Rear
Used for: Turn Signal Light Bulb Rear
This page covers the 2017 Toyota Land Cruiser and helps you verify bulb sizes by lighting position, so you can match the correct replacement to the right lamp. Because exterior and interior lighting can differ by trim, market, and body style, it is best to confirm each location before ordering parts.
For the 2017 Land Cruiser, several lighting positions use LED assemblies, while a few serviceable positions use specific bulb types such as 921, 168/168NA, 7444NA, and 7440A/7440. Use the chart below to identify the bulb for headlights, fog lights, turn signals, reverse lights, license plate lights, and cabin lighting without guessing.
Fitment can vary by trim package, regional specification, and whether the vehicle has factory LED lighting or a different lighting package, so always compare the page listing with the bulb already installed in your Land Cruiser. If your truck has been converted to aftermarket LED bulbs, the replacement may not match the original factory bulb type, and some LED upgrades can require different connectors, resistors, or load management to avoid warning messages or hyperflash. Before buying, remove the existing bulb and check the number printed on the base, especially for serviceable positions like the reverse lights, front side markers, front turn signals, parking lights, and license plate lamps.
The chart lists the headlight high beam and low beam as LED on the 2017 Toyota Land Cruiser. That means the headlamp assembly is an LED setup rather than a standard replaceable halogen bulb in the positions shown here.
The front fog light bulb is listed as LED. If your Land Cruiser has factory fog lights, the bulb is part of an LED lighting unit rather than a conventional bulb type.
The back up reverse light bulb is listed as 921. The page also shows back up light bulb as 921, so that is the serviceable bulb size to check for the rear reverse lamps.
The front side marker light bulb is listed as 168, 168NA. That means the front side marker position uses a bulb in the 168-family size, so confirm the exact installed bulb before ordering.
The front turn signal light bulb is listed as 7444NA. This is the bulb size shown for the front signal position on the 2017 Toyota Land Cruiser.
The front parking light bulb is listed as 7444NA, the same size shown for the front turn signal position on this page.
The rear turn signal light bulb is listed as 7440A, 7440. That indicates the rear signal position may use one of those bulb types depending on the exact lighting setup.
The brake light bulb and the center high mount stop light bulb are both listed as LED. On this vehicle, those positions are shown as LED lighting rather than a standard replaceable incandescent bulb.
The license plate light bulb is listed as LED, 168. That means the license plate lamp position is shown with an LED setup, and the chart also references the 168 bulb family for that location.
The dome light bulb and map light bulb are both listed as LED. These interior overhead and reading light positions are shown as LED on the 2017 Land Cruiser.
The trunk or cargo area light is listed as LED. That means the cargo-area lighting shown here is an LED setup rather than a standard bulb size like 194 or 921.
Because trim, market, and body style can change the lighting setup, the safest way to confirm fitment is to compare the chart with the bulb currently installed in your vehicle. This is especially important if the Land Cruiser has had aftermarket LED conversions or prior repairs.
