Used for: Back Up Light Bulb, Back Up Reverse Light Bulb
Used for: License Plate Light Bulb, Side Marker Light Bulb Front
Used for: Parking Light Bulb, Turn Signal Light Bulb Front
Used for: Side Marker Light Bulb Front
Used for: Turn Signal Light Bulb Rear
Used for: Turn Signal Light Bulb Rear
The 2019 Toyota Land Cruiser uses a mix of LED lighting and a few common replaceable bulb types, so it is important to confirm the correct fitment by lighting position. This page is designed to help you quickly verify the bulb size for each exterior and interior location before you buy replacements.
Because trim level, market, and body style can affect the lighting package, the same Land Cruiser may not use the exact same bulb setup in every region. Use the bulb chart on this page to match the bulb size to the correct spot, such as the headlight, fog light, reverse light, license plate light, or interior lamp.
For the best fit, compare the bulb listed here with the bulb already installed in your vehicle, especially if your Land Cruiser has been modified or converted from factory halogen to LED. Some lighting positions on the 2019 Toyota Land Cruiser are LED assemblies rather than serviceable bulbs, while others use standard replaceable bulbs such as 921, 168, 7444NA, or 7440A/7440 depending on the location. Aftermarket LED conversions can change beam pattern, brightness, or warning behavior, so it is smart to check the installed bulb, connector style, and housing depth before ordering. When in doubt, verify the bulb by position first and then confirm the exact replacement part before purchase.
The headlight high beam and low beam on the 2019 Toyota Land Cruiser are listed as LED. That means the light source is part of an LED setup rather than a standard replaceable halogen bulb.
The front fog light bulb is listed as LED. If your vehicle matches this configuration, you should verify the complete LED unit or assembly rather than looking for a conventional bulb number.
The front turn signal light bulb is listed as 7444NA. Always confirm the socket and bulb base before ordering, since lighting packages can vary by market.
The front parking light bulb is listed as 7444NA on this page. In some vehicles, the parking light and front turn signal may use the same bulb type or closely related fitment, so position matters.
The rear turn signal light bulb is listed as 7440A or 7440. Because both are shown as possible fitments, it is a good idea to check the installed bulb before buying a replacement.
The back up reverse light bulb and back up light bulb are both listed as 921. This is one of the most common service bulbs on the vehicle and is usually straightforward to replace if your housing is accessible.
The license plate light bulb is listed as LED, 168. Depending on the exact setup, this may indicate an LED lamp with a 168-style fitment reference, so confirm the installed bulb or module before purchase.
Yes, the dome light bulb, map light bulb, and trunk or cargo area light are all listed as LED on this page. If your Land Cruiser has factory LED interior lighting, the entire module may be the serviceable part rather than a standard bulb.
The front side marker light bulb is listed as 168 or 168NA. Either designation may appear depending on the exact market or lamp configuration, so checking the original bulb is recommended.
The rear side marker light bulb is listed as LED. That means the rear side marker may be an LED lamp or integrated LED unit instead of a conventional bulb.
Yes, the brake light bulb and the center high mount stop light bulb are both listed as LED. In many cases, these are integrated LED assemblies rather than individual replaceable bulbs.
Because trim, package, and regional differences can change the lighting setup on the 2019 Toyota Land Cruiser. Checking the installed bulb helps you avoid ordering the wrong size, especially when a lamp may be LED, shared with another function, or listed with more than one possible bulb number.
