
Marsauto M1C H11 LED Fog Light Bulbs, 30000LM 6000K Cool ...
$17.99
Buy on Amazon →
Used for: Fog Light Bulb Front
Used for: Fog Light Bulb Front
Used for: Headlight Bulb High Beam, Daytime Running Light Bulb
Used for: Headlight Bulb Low Beam(with halogen headlights)
Used for: Headlight Bulb Low Beam(with HID headlights)
Used for: Back Up Reverse Light Bulb
Used for: Brake Light Bulb, Tail Light Bulb Outer
Used for: License Plate Light Bulb, Interior Door Light Bulb, Map Light Bulb
Used for: License Plate Light Bulb, Interior Door Light Bulb, Map Light Bulb
Used for: Parking Light Bulb, Turn Signal Light Bulb Front
Used for: Side Marker Light Bulb Front
Used for: Side Marker Light Bulb Rear
Used for: Tail Light Bulb Inner, Dome Light Bulb, Vanity Mirror Light Bulb
Used for: Tail Light Bulb Inner, Dome Light Bulb, Vanity Mirror Light Bulb
Used for: Turn Signal Light Bulb Rear
Used for: Glove Box Light Bulb(Compare to original - Option 1)
Used for: Glove Box Light Bulb(Compare to original - Option 2)
Used for: Trunk or Cargo Area Light
This 2010 Toyota Venza bulb size guide helps you verify the correct bulbs by lighting position, so you can replace the right lamp without guessing. Whether you are changing a headlight, brake light, map light, or license plate bulb, matching the bulb to the exact location is the easiest way to avoid fitment mistakes.
The 2010 Toyota Venza uses different bulb types depending on the light position, and some setups vary by trim, market, or lighting package. This page organizes the bulb chart by function so you can quickly find the correct size for your Venza before you buy replacements.
For best fitment, compare your Venza’s trim and headlight package before ordering, since halogen and HID low beam setups use different bulbs. The low beam bulb is H11 on models with halogen headlights, while HID-equipped models use D4S. Fog light fitment can also vary, with H11 LED or H16 LED listed for the front fog lights. If you are converting to aftermarket LED bulbs, make sure the bulb base, depth, and connector style match the original housing, and check whether the new bulb needs a resistor or adapter to avoid warning lights or hyperflash. Because trim and lighting package differences can affect bulb choice, it is smart to inspect the installed bulb before purchase whenever possible.
The low beam bulb depends on the headlight type. Models with halogen headlights use H11 low beam bulbs, while models with HID headlights use D4S.
The high beam bulb size is 9005.
The daytime running light bulb size is 9005.
The front fog light listing shows H11 LED or H16 LED, so fitment may depend on the exact trim or lighting setup.
The brake light bulb size is 7443R.
The outer tail light bulb size is 7443R.
The rear turn signal bulb size is 7440A.
Both the front turn signal light and parking light use 3457A.
The backup reverse light bulb size is 921.
The license plate light bulb sizes listed are 168 and 917.
The map light, interior door light, dome light, and vanity mirror light are listed with 168, 917 or 194, 7441 depending on the position.
Yes. Trim, lighting package, market, and body style can change the bulb used in certain positions, especially headlights and fog lights.
Check the installed bulb, the headlight type, and the exact lighting position. That helps confirm whether your Venza uses halogen or HID low beams and whether the replacement matches the original base and size.
Two glove box bulb options are listed: 2721 for one fitment and 74 for the other, so it is best to compare the original bulb before ordering.
The trunk or cargo area light uses DE3022.