
Marsauto M1C H11 LED Fog Light Bulbs, 30000LM 6000K Cool ...
$17.99
Buy on Amazon →
Used for: Fog Light Bulb Front
Used for: Fog Light Bulb Front
Used for: Headlight Bulb High Beam, Daytime Running Light Bulb(AWD)
Used for: Headlight Bulb High Beam and Low Beam
Used for: Headlight Bulb Low Beam
Used for: Back Up Reverse Light Bulb
Used for: Brake Light Bulb, Tail Light Bulb Outer
Used for: License Plate Light Bulb
Used for: License Plate Light Bulb
Used for: Parking Light Bulb, Turn Signal Light Bulb Front
Used for: Parking Light Bulb(AWD), Turn Signal Light Bulb Front(AWD)
Used for: Side Marker Light Bulb Front
Used for: Side Marker Light Bulb Rear
Used for: Tail Light Bulb Inner
Used for: Tail Light Bulb Inner
Used for: Turn Signal Light Bulb Rear
This 2013 Toyota Venza bulb size guide helps you verify the correct bulb by lighting position, so you can match the right part before you buy. Because the Venza could be equipped with different lighting setups, the bulb chart below is organized by location, making it easier to find the exact fit for headlights, tail lights, turn signals, and other exterior lamps.
Use this page as a quick reference when replacing a burned-out bulb or planning an upgrade on your 2013 Toyota Venza. The correct size can vary with trim, drivetrain, and lighting package, so checking the bulb position first is the safest way to avoid buying the wrong part.
Fitment can differ between trims, markets, and body styles, especially on Venza models with different headlamp or fog lamp packages. Some positions use standard halogen bulbs, while others may be listed as LED or have LED-style replacements available, so it is important to confirm whether your vehicle uses the original halogen setup or a factory LED assembly before ordering. If you are considering an aftermarket conversion, make sure the bulb type matches the housing and that the replacement is compatible with your vehicle’s electrical system. The best practice is to inspect the installed bulb before purchase whenever possible, since the same model year can have more than one valid bulb size depending on equipment.
The low beam headlight bulb listed for the 2013 Toyota Venza is H11.
The standard high beam headlight bulb size is 9005.
Yes, some AWD configurations are listed with a D4S headlight bulb for high beam and low beam, so you should verify the exact headlamp setup on the vehicle before buying.
The front fog light bulb is listed as H11 LED or H16 LED, depending on the specific setup.
The back up reverse light bulb is 921.
The front turn signal light bulb is 7444NA.
The rear turn signal light bulb is 7440A.
The inner tail light bulb is listed as 194 or 7441, and the outer tail light bulb is 7443R.
The brake light bulb is 7443R.
The license plate light bulb is listed as 2825 or 98.
The front side marker light bulb is 168NA.
The rear side marker light bulb is 7443A.
Yes, some positions are listed as LED, including the center high mount stop light and daytime running light on certain configurations.
Check the bulb position on the vehicle, compare it with the chart on this page, and confirm the installed bulb before ordering if the trim or lighting package is uncertain.