
Marsauto M1C H11 LED Fog Light Bulbs, 30000LM 6000K Cool ...
$17.99
Buy on Amazon →
Used for: Fog Light Bulb Front
Used for: Fog Light Bulb Front
Used for: Headlight Bulb High Beam, Daytime Running Light Bulb
Used for: Headlight Bulb Low Beam(with halogen headlights)
Used for: Headlight Bulb Low Beam(with HID headlights)
Used for: Back Up Reverse Light Bulb
Used for: Brake Light Bulb, Tail Light Bulb Outer
Used for: License Plate Light Bulb, Interior Door Light Bulb, Map Light Bulb
Used for: License Plate Light Bulb, Interior Door Light Bulb, Map Light Bulb
Used for: Parking Light Bulb, Turn Signal Light Bulb Front
Used for: Side Marker Light Bulb Front
Used for: Side Marker Light Bulb Rear
Used for: Tail Light Bulb Inner, Dome Light Bulb, Vanity Mirror Light Bulb
Used for: Tail Light Bulb Inner, Dome Light Bulb, Vanity Mirror Light Bulb
Used for: Turn Signal Light Bulb Rear
Used for: Glove Box Light Bulb(Compare to original - Option 1)
Used for: Glove Box Light Bulb(Compare to original - Option 2)
Used for: Trunk or Cargo Area Light
The 2011 Toyota Venza uses different bulb sizes depending on the lighting position, so this page is designed to help you verify the correct fit before you buy. Whether you are replacing a headlight, a parking light, or an interior bulb, matching the bulb to the exact location is the safest way to avoid returns and installation problems.
Use this 2011 Toyota Venza bulb guide to check the bulb type by lighting position. The Venza can have different setups for halogen or HID low beams, and some trim or market differences may affect the exact bulb used in certain lamps. Confirming the location first makes replacement much easier.
For best fitment, compare your vehicle’s trim, lighting package, and body style before ordering. This is especially important on the 2011 Venza because low beam headlights may be H11 on halogen-equipped models or D4S on HID-equipped models, while fog light choices can vary as well. If your vehicle has been converted to LED or uses aftermarket housings, the bulb listed on the vehicle may not match the original factory specification. Always check the installed bulb before purchase, especially for small interior and exterior lamps where similar-looking bases can be easy to mix up.
It depends on the headlight package. Halogen-equipped models use H11 low beam bulbs, while HID-equipped models use D4S low beam bulbs.
The high beam headlight bulb is 9005.
The daytime running light bulb is 9005.
The front fog light bulb listing is H11 LED or H16 LED, depending on the setup and replacement choice.
Both the brake light bulb and the outer tail light bulb are 7443R.
The rear turn signal light bulb is 7440A.
Both the front turn signal light and the parking light use 3457A.
The back-up reverse light bulb is 921.
The license plate light bulb is listed as 168 or 917.
The map light bulb and dome light bulb are listed as 168 or 917 for some applications, and 194 or 7441 for others depending on the exact lamp position.
The center high mount stop light uses an LED setup.
The front side marker light bulb is 168NA, and the rear side marker light bulb is 7443A.
There are two glove box light listings: 2721 for one application and 74 for another, so it is best to confirm the installed bulb before ordering.
Yes. Trim and lighting package can vary by market and body style, so some bulb positions may differ even on the same 2011 Toyota Venza.
Yes. Checking the installed bulb is the best way to confirm fitment, especially if the vehicle has aftermarket bulbs, LED conversions, or previous repairs.