
Marsauto M1C H11 LED Fog Light Bulbs, 30000LM 6000K Cool ...
$17.99
Buy on Amazon →
Used for: Fog Light Bulb Front
Used for: Headlight Bulb High Beam
Used for: Headlight Bulb Low Beam(with halogen headlights)
Used for: Headlight Bulb Low Beam(with HID headlights)
Used for: Back Up Reverse Light Bulb
Used for: Brake Light Bulb, Tail Light Bulb
Used for: Center High Mount Stop Light Bulb
Used for: License Plate Light Bulb, Map Light Bulb, Trunk or Cargo Area Light
Used for: Parking Light Bulb, Side Marker Light Bulb Front, Turn Signal Light Bulb Front Inner
Used for: Turn Signal Light Bulb Front Outer
Used for: Turn Signal Light Bulb Rear
Used for: Dome Light Bulb
This page lists the bulb sizes for the 2006 Mazda Mazda3 by lighting position, so you can quickly verify the correct fit before ordering replacements. Because exterior and interior lamps use different bulb types, checking the exact location is the easiest way to avoid mismatches.
The 2006 Mazda Mazda3 may use different lighting setups depending on trim, body style, and market. That is why a position-based bulb chart is useful: it helps you confirm the right bulb for the headlight, tail light, license plate light, dome light, and other spots on the car.
For best results, compare the bulb size on this page with the bulb already installed in your Mazda3 before buying, especially if the car has been modified or has an optional lighting package. Headlights can differ between halogen and HID setups, and some owners switch to LED replacements or aftermarket conversions that may change fitment or beam pattern. If you are replacing a bulb after a failure, check both sides of the vehicle when possible, since the opposite lamp can help confirm the correct size and style. When in doubt, match the installed bulb number and the connector style before purchase.
The low beam bulb listed for halogen headlights is H7.
The low beam bulb listed for HID headlights is D2S.
The high beam bulb is 9005.
The front fog light bulb is listed as H11 LED.
Both the brake light and tail light use 7443R.
The rear turn signal bulb is 7440A.
The front outer turn signal bulb is 2827.
Those positions are listed as 1157A.
The back up reverse light bulb is 7440.
The center high mount stop light bulb is 921.
The dome light uses DE3175, and the map light, trunk or cargo area light, and license plate light all use 2825.
Not always. Trim, body style, market, and lighting package can change the bulb setup, especially for headlights and fog lights.
Yes, many owners do, but fitment and beam pattern can vary. It is important to choose an LED that matches the socket and works well in the housing.
Yes. Checking the installed bulb is the safest way to confirm fitment, especially if the car has been modified or if you are unsure whether it has halogen or HID headlights.