
AUTOONE 9006/HB4 LED Bulbs, 70000LM 1200% Ultra Bright, R...
$26.99
Buy on Amazon →
Used for: Fog Light Bulb Front(Compare to original - Option 1)
Used for: Fog Light Bulb Front(Compare to original - Option 2)
Used for: Headlight Bulb High Beam
Used for: Headlight Bulb High Beam and Low Beam
Used for: Headlight Bulb Low Beam
Used for: Back Up Reverse Light Bulb, Center High Mount Stop Light Bulb(Sedan)
Used for: Brake Light Bulb, Tail Light Bulb
Used for: Center High Mount Stop Light Bulb(Hatchback, with halogen headlights)
Used for: Daytime Running Light Bulb(with halogen headlights)
Used for: Daytime Running Light Bulb(with HID headlights)
Used for: License Plate Light Bulb, Parking Light Bulb
Used for: Side Marker Light Bulb Front, Turn Signal Light Bulb Front
Used for: Side Marker Light Bulb Rear
Used for: Turn Signal Light Bulb Rear
Used for: Dome Light Bulb, Map Light Bulb
Used for: Trunk or Cargo Area Light(Hatchback, Compare to original - Option 2)
Used for: Trunk or Cargo Area Light(Sedan, Compare to original - Option 1)
This 2013 Mazda Mazda3 bulb size guide helps you verify the correct bulb by lighting position, so you can match the right part before you buy. Because the Mazda3 was offered with different trims, body styles, and lighting packages, the bulb size for one lamp can differ from another on the same year and model.
Use this page to check common exterior and interior bulb fitments for the 2013 Mazda Mazda3, including headlights, turn signals, brake lights, license plate lights, dome lights, and cargo area bulbs. It is a practical reference for quick replacements and for comparing the bulb in your car with the listed size.
Fitment can vary by market, trim, and equipment package, so always confirm whether your Mazda3 has halogen headlights, HID headlights, or an LED or aftermarket conversion before ordering. Some positions also have different options depending on sedan versus hatchback body style. If you are replacing a bulb that has been changed before, check the installed bulb number on the base or glass and compare it to the lamp housing before purchase. That is especially important for fog lights, daytime running lights, and headlight conversions, where aftermarket parts may not match the original setup exactly.
The low beam bulb listed for the 2013 Mazda Mazda3 is H11 for many halogen-equipped setups. Some versions with HID headlights use D2S instead, so confirm your headlight package before buying.
The high beam bulb size is 9005 on the standard halogen setup. If your car has a different headlight system, verify the installed bulb type first.
Yes. For models with HID headlights, the headlight bulb listing is D2S. Halogen models use separate high beam and low beam bulbs instead.
The front turn signal bulb is 7444NA. The same bulb number is also listed for the front side marker light.
The rear turn signal bulb is 7440A on the 2013 Mazda Mazda3.
Both the brake light and tail light bulb sizes are 7443R.
The rear side marker light bulb is 7443A.
The back up reverse light bulb is 7440.
The license plate light bulb is 2825.
The dome light bulb is DE3175.
The map light bulb is DE3175 as well.
The parking light bulb is 2825.
For the sedan, the center high mount stop light bulb is 7440.
For the hatchback with halogen headlights, the center high mount stop light bulb is 921.
For the sedan, the trunk or cargo area light can use 194 as an option. For the hatchback, one listed option is DE3022.
Fog light fitment can vary. One listed option is 9006 LED, and another listed option is H11 LED. Check the original bulb and fog lamp housing before ordering.
With halogen headlights, the daytime running light bulb is 7443. With HID headlights, the daytime running light bulb is H8 LED.
Trim and lighting package can change the bulb size, especially for headlights, daytime running lights, and fog lights. Matching the bulb to your exact body style and equipment helps avoid buying the wrong part.
Some positions have LED-style options listed, but aftermarket LED conversions may not fit or perform the same as the original bulb. Make sure the bulb base, size, and housing compatibility are correct before installing LEDs.