
Marsauto M1C H11 LED Fog Light Bulbs, 30000LM 6000K Cool ...
$17.99
Buy on Amazon →
Used for: Fog Light Bulb Front
Used for: Headlight Bulb High Beam, Daytime Running Light Bulb
Used for: Headlight Bulb High Beam and Low Beam
Used for: Headlight Bulb Low Beam
Used for: Back Up Light Bulb(Hatchback)
Used for: Back Up Light Bulb(Sedan)
Used for: Brake Light Bulb, Tail Light Bulb
Used for: License Plate Light Bulb, Side Marker Light Bulb Front(with HID headlights)
Used for: Parking Light Bulb, Side Marker Light Bulb Front(with halogen headlights)
Used for: Side Marker Light Bulb Rear
Used for: Turn Signal Light Bulb Front, Turn Signal Light Bulb Rear
Used for: Dome Light Bulb, Map Light Bulb
Used for: Trunk or Cargo Area Light(Hatchback, Compare to original - Option 2)
Used for: Trunk or Cargo Area Light(Sedan, Compare to original - Option 1)
The 2016 Mazda Mazda3 uses different bulb sizes depending on the lighting position, body style, and headlight package. This page is designed to help you verify the correct bulb size by location, so you can match the right part before ordering replacements for headlights, turn signals, interior lights, and exterior markers.
Because Mazda3 lighting can vary between sedan and hatchback models, and between halogen and HID-equipped trims, it is important to check the exact bulb position on your vehicle. Use this guide to confirm the bulb size for each lamp and avoid confusion when replacing a burned-out bulb or upgrading a light.
For the best fitment results, always compare your trim and lighting package with the bulb chart before buying. A halogen-equipped Mazda3 may use different front marker or headlight bulbs than an HID model, and some aftermarket LED conversions may require additional parts or may not fit correctly in the original housing. If your car has been modified, or if you are unsure whether it has the factory bulb type, remove the installed bulb and check the number printed on the base before purchasing a replacement.
The low beam bulb size is H11 on this page. This applies to the standard low beam setup listed for the 2016 Mazda Mazda3.
The high beam bulb size is 9005. Some versions also list a D4S setup for combined high and low beam HID headlights, so confirm your headlight package before ordering.
Yes, the daytime running light bulb is listed as 9005. Always verify the exact lighting configuration on your vehicle, since trim and market can affect fitment.
The front turn signal bulb size is 7440A. This is the bulb listed for the front signal lamp on the 2016 Mazda Mazda3.
The rear turn signal bulb size is also 7440A. That makes the front and rear turn signal bulb sizes the same on this page.
Both the brake light bulb and the tail light bulb are listed as 7443R. If you are replacing either one, check the lamp function and housing before buying.
The license plate light bulb size is 2825. This is a common small wedge-style bulb used for plate illumination.
The dome light bulb size is DE3175. The map light bulb is also DE3175, so both interior overhead lights use the same size on this page.
For the sedan, the back up light bulb is listed as 921. This is different from the hatchback listing, so body style matters.
For the hatchback, the back up light bulb is listed as 7440. Make sure you match the hatchback configuration, since the sedan uses a different bulb size.
Front side marker bulbs vary by headlight type. With HID headlights, the front side marker bulb is 2825, while with halogen headlights it is 2827.
The front fog light bulb is listed as H11 LED. If you are replacing or upgrading fog lights, confirm that the LED setup is compatible with your housing and connector.
The rear side marker light bulb size is 7443A. This is the rear marker bulb listed for the 2016 Mazda Mazda3.
For the sedan, the trunk or cargo area light is listed as 194 for one option. For the hatchback, the trunk or cargo area light is listed as DE3022 for the original-style option shown on this page.
Check whether your car is a sedan or hatchback, and whether it has halogen or HID headlights. Then match the bulb position on the chart and, if possible, compare the installed bulb number before ordering.