
Marsauto M1C H11 LED Fog Light Bulbs, 30000LM 6000K Cool ...
$17.99
Buy on Amazon →
Used for: Fog Light Bulb Front
Used for: Headlight Bulb High Beam, Headlight Bulb Low Beam(with halogen headlights)
Used for: Headlight Bulb Low Beam(with HID headlights)
Used for: Back Up Reverse Light Bulb, Center High Mount Stop Light Bulb(Compare to original - Option 1)
Used for: Brake Light Bulb, Tail Light Bulb
Used for: Center High Mount Stop Light Bulb(Compare to original - Option 2)
Used for: License Plate Light Bulb, Parking Light Bulb(Compare to original - Option 1), Side Marker Light Bulb Front, Courtesy Light Bulb, Dome Light Bulb, Map Light Bulb
Used for: Parking Light Bulb(Compare to original - Option 2), Turn Signal Light Bulb Front
Used for: Turn Signal Light Bulb Rear
This page helps you verify the bulb sizes for the 2006 Mazda Mazda6 by lighting position, so you can match the correct replacement before you buy. Whether you are changing a headlight, tail light, interior lamp, or license plate bulb, checking the exact location is the easiest way to avoid ordering the wrong part.
The 2006 Mazda Mazda6 uses different bulb types depending on the lamp position and, in some cases, the headlight setup. This is especially important on a car like the Mazda6, where halogen and HID configurations may use different low beam bulbs, and trim or market differences can change the lighting package.
For best fitment, always compare your current bulb to the listing on this page before purchasing, especially if your Mazda6 has been modified or if you are replacing bulbs after a previous owner’s repair. Trim level, body style, and lighting package can affect the exact application, and aftermarket LED upgrades may fit differently than stock halogen bulbs even when the base size is the same. If you are converting from halogen to LED, check for depth, connector style, and beam pattern compatibility, and remember that some housings are designed around the original bulb shape. When in doubt, remove the installed bulb and confirm the number printed on the base before ordering.
The low beam bulb depends on the headlight type. Models with halogen headlights use H1 low beam bulbs, while models with HID headlights use D2S low beam bulbs.
The high beam headlight bulb is H1.
The front turn signal bulb is 2357A.
The rear turn signal bulb is 7440A.
Both the brake light bulb and the tail light bulb are listed as 7443R.
The front fog light bulb is H11 LED on this page.
The license plate light bulb is 2825.
Both the dome light and map light use 2825 bulbs.
The front side marker light bulb and courtesy light bulb are both 2825.
Two parking light options are shown on this page: 2825 for one application and 2357A for another, so it is important to verify your installed bulb before buying.
Two center high mount stop light options are listed: 921 and 7440, depending on the original setup.
Because trim, market, body style, and lighting package can vary, some positions may have more than one valid bulb option. Checking the exact lamp location and the installed bulb helps confirm the right match.
Yes, many owners upgrade to LED, but fitment can vary. Make sure the LED bulb matches the socket, fits inside the housing, and produces a proper beam pattern for the lamp position.
Yes. Removing the installed bulb and reading the number on the base is the safest way to confirm fitment, especially if the car has been modified or repaired before.