
Marsauto M1C H11 LED Fog Light Bulbs, 30000LM 6000K Cool ...
$17.99
Buy on Amazon →
Used for: Fog Light Bulb Front
Used for: Headlight Bulb High Beam, Daytime Running Light Bulb
Used for: Headlight Bulb High Beam and Low Beam
Used for: Headlight Bulb Low Beam
Used for: Back Up Reverse Light Bulb
Used for: License Plate Light Bulb, Side Marker Light Bulb Rear, Courtesy Light Bulb
Used for: Parking Light Bulb, Side Marker Light Bulb Front, Turn Signal Light Bulb Front
Used for: Tail Light Bulb Inner
Used for: Turn Signal Light Bulb Rear
Used for: Dome Light Bulb, Map Light Bulb
Used for: Trunk or Cargo Area Light
This page covers the 2015 Mazda Mazda6 bulb sizes by lighting position, so you can quickly match the correct replacement to the right lamp. Whether you are changing a headlight, interior bulb, or rear signal light, checking the bulb chart by location helps reduce guesswork and makes replacement easier.
The 2015 Mazda Mazda6 uses different bulb types depending on the lamp location, and some setups can vary by trim, body style, or lighting package. Use this guide to verify the correct bulb before you buy, especially if you are replacing a single bulb or comparing the left and right sides of the car.
For best fitment, always confirm whether your Mazda6 has halogen headlights or HID-style lighting before ordering parts, since the low beam and high beam setup can differ by configuration. Trim and package differences can also affect fog lights, rear lamps, and interior lighting, and aftermarket LED conversions may require additional adapters, resistors, or compatibility checks. If possible, inspect the installed bulb or compare the socket shape before purchase, because the same model year can use different bulbs in different markets or equipment levels.
Many 2015 Mazda Mazda6 models use an H11 bulb for the low beam headlight. Some versions may use a different headlight setup, so confirm the installed bulb before ordering.
The high beam headlight bulb listed for this model is 9005 on many configurations. Always verify your vehicle’s lighting package, since trim differences can change the setup.
Yes, the daytime running light bulb is listed as 9005 on this page. That makes it important to check the exact lamp position before replacing a bulb.
The front fog light bulb is listed as H11 LED. If your car has been modified or uses a different package, check the existing bulb and connector first.
The front turn signal light bulb is 7444NA. This same bulb type is also listed for the parking light and front side marker light positions.
The rear turn signal light bulb is 7440A on this page. It is a separate fitment from the front signal bulb, so do not assume they are the same.
The license plate light bulb is 2825. This is a common small wedge-style bulb used in several exterior accent and utility light locations.
Both the dome light bulb and map light bulb are listed as DE3175. If one interior bulb fails, it is often a good idea to replace the matching bulb on the other side as well.
The trunk or cargo area light bulb is 194. This bulb is typically small and easy to replace once you access the cargo lamp housing.
The back up reverse light bulb is listed as 7440. Make sure the replacement matches the socket and brightness needs of your specific trim.
The rear side marker light bulb and courtesy light bulb are both listed as 2825, along with the license plate light. That makes it easier to keep a spare of the correct type on hand.
The tail light bulb inner is listed as 2825R. This is a specific rear lamp fitment, so it should not be confused with the outer tail light or turn signal bulb.
Because trim, market, and lighting package differences can change the bulb used in a given position. Checking the installed bulb helps avoid ordering the wrong part, especially on cars with previous repairs or aftermarket lighting.