
Marsauto M1C H11 LED Fog Light Bulbs, 30000LM 6000K Cool ...
$17.99
Buy on Amazon →
Used for: Fog Light Bulb Front
Used for: Headlight Bulb High Beam, Daytime Running Light Bulb
Used for: Headlight Bulb High Beam and Low Beam
Used for: Headlight Bulb Low Beam
Used for: Back Up Reverse Light Bulb
Used for: License Plate Light Bulb, Side Marker Light Bulb Rear, Courtesy Light Bulb
Used for: Parking Light Bulb, Side Marker Light Bulb Front, Turn Signal Light Bulb Front
Used for: Tail Light Bulb Inner
Used for: Turn Signal Light Bulb Rear
Used for: Dome Light Bulb, Map Light Bulb
Used for: Trunk or Cargo Area Light
This 2014 Mazda Mazda6 bulb size guide helps you quickly verify the correct bulbs by lighting position, so you can replace a burned-out lamp without guessing. Whether you are changing a headlight, interior light, or rear signal bulb, the page is organized to make fitment checks easier for this specific model year.
The 2014 Mazda Mazda6 can use different bulb setups depending on trim, lighting package, market, and body style. That is why it is important to match the bulb to the exact position on the car, since front, rear, and cabin lights may not all use the same type.
Before buying replacements, compare the bulb in your vehicle with the listing for its exact location. Some 2014 Mazda Mazda6 models use halogen bulbs in certain positions, while others may have LED or HID-style lighting equipment, especially in higher trims or with factory lighting packages. Aftermarket conversions can also change what is installed, so the safest approach is to check the bulb already in the car and confirm the base type before ordering. If a previous owner upgraded headlights, fog lights, or interior lamps, the installed bulb may differ from the original factory setup.
The low beam bulb size listed for the 2014 Mazda Mazda6 is H11 for many setups. Some versions may use a D4S system for combined high and low beam HID-style headlights, depending on trim and lighting package.
The high beam bulb size listed is 9005 on many 2014 Mazda Mazda6 configurations. If your car has a different headlight package, verify the installed bulb before buying.
On the bulb chart for this page, the daytime running light bulb is also listed as 9005. That does not mean every car is identical, so it is still best to confirm the exact headlamp assembly on your Mazda6.
The front turn signal light bulb is listed as 7444NA. The same bulb type is also shown for the front parking light and front side marker positions on this page.
The rear turn signal light bulb is listed as 7440A for the 2014 Mazda Mazda6.
The back up reverse light bulb is listed as 7440. If one side is out, it is a good idea to replace both sides at the same time so the light output stays even.
The front fog light bulb is listed as H11 LED on this page. Because fog light setups can vary, check the actual lamp housing before ordering a replacement.
The dome light bulb is listed as DE3175. The map light bulb is also listed as DE3175 on this 2014 Mazda Mazda6 page.
The license plate light bulb is listed as 2825. This same bulb type is also shown for the rear side marker and courtesy light positions.
Yes. The trunk or cargo area light bulb is listed as 194, while the dome and map lights use DE3175. Always match the bulb to the specific location instead of assuming the interior bulbs are the same.
Trim and lighting package differences can change the bulb setup, and market or body style differences can also matter. A Mazda6 with a halogen headlight system may not use the same bulbs as one with HID or LED-related equipment.
In some positions, aftermarket LED replacements are available, but fitment and beam pattern can vary. Make sure the LED bulb matches the socket, clears the housing, and works properly with the car’s electrical system.
Check the installed bulb in the vehicle, confirm the lighting position, and compare it with the bulb chart for this exact year and model. This is especially important for headlights, fog lights, and any car that may have been modified with aftermarket parts.