
Marsauto M1C H11 LED Fog Light Bulbs, 30000LM 6000K Cool ...
$17.99
Buy on Amazon →
Used for: Fog Light Bulb Front
Used for: Headlight Bulb High Beam, Headlight Bulb Low Beam(with halogen headlights)
Used for: Headlight Bulb Low Beam(with HID headlights)
Used for: Back Up Reverse Light Bulb, Center High Mount Stop Light Bulb(Compare to original - Option 1)
Used for: Brake Light Bulb, Tail Light Bulb
Used for: Center High Mount Stop Light Bulb(Compare to original - Option 2)
Used for: License Plate Light Bulb, Parking Light Bulb(Compare to original - Option 1), Side Marker Light Bulb Front, Courtesy Light Bulb, Dome Light Bulb, Map Light Bulb
Used for: Parking Light Bulb(Compare to original - Option 2), Turn Signal Light Bulb Front
Used for: Turn Signal Light Bulb Rear
This page helps you verify the bulb sizes for the 2007 Mazda Mazda6 by lighting position, so you can match the correct replacement before you buy. Because different trims, lighting packages, and body styles can use different lamps, it is a good idea to confirm the exact socket and bulb type for each light on your car.
For the 2007 Mazda Mazda6, the listed sizes cover exterior and interior locations such as headlights, fog lights, tail lights, turn signals, reverse lights, license plate lights, dome lights, map lights, side markers, and courtesy lights. Use the position-specific chart to avoid confusion between bulbs that may look similar but are not interchangeable.
Fitment can vary by market, trim, and factory equipment, especially on cars with halogen headlights versus HID headlights. Aftermarket LED conversions may also change the bulb you need, so check whether your Mazda6 still uses the original halogen or HID setup before ordering. If you are replacing a burned-out bulb, compare the old bulb’s base and markings first, since some positions have more than one listed option. When possible, inspect the installed bulb before purchase to confirm the exact fit and reduce the chance of returns.
The low beam bulb size listed for halogen headlights is H1.
The low beam bulb size listed for HID headlights is D2S.
The high beam bulb size listed is H1.
The front turn signal bulb size listed is 2357A.
The rear turn signal bulb size listed is 7440A.
Both the brake light bulb and tail light bulb are listed as 7443R.
The back up reverse light bulb size listed is 921.
The license plate light bulb size listed is 2825.
The dome light, map light, courtesy light, and side marker light front are all listed as 2825.
Some positions have compare-to-original options because Mazda6 trim or lighting package differences can affect the exact bulb used. Always match the bulb to your car’s installed setup.
In some positions, yes, but fitment and compatibility depend on the housing, socket, and whether the car has halogen or HID equipment. Make sure the LED matches the correct base and size for that location.
The front fog light bulb is listed as H11 LED.
Yes. Checking the installed bulb is one of the best ways to confirm fitment, especially on a 2007 Mazda Mazda6 with trim or package differences.