
PIAA 19615 9005 (HB3) Xtreme White Plus
$64.57
Buy on Amazon →
Used for: Headlight Bulb High Beam(S)
Used for: Headlight Bulb High Beam(Titanium)
Used for: Headlight Bulb Low Beam(S)
Used for: Headlight Bulb Low Beam(Titanium)
Used for: Back Up Reverse Light Bulb
Used for: Brake Light Bulb, Tail Light Bulb
Used for: License Plate Light Bulb
Used for: License Plate Light Bulb
Used for: Parking Light Bulb
Used for: Parking Light Bulb
Used for: Parking Light Bulb(SE)
Used for: Side Marker Light Bulb Front
Used for: Turn Signal Light Bulb Front, Turn Signal Light Bulb Rear
Used for: Turn Signal Light Bulb Front(S)
This 2013 Ford Escape bulb size guide helps you verify the correct bulb by lighting position, so you can match the right part before you buy. Because trim level, market, and lighting package can change the setup, it is smart to confirm the exact bulb type for each exterior and interior lamp on your vehicle.
Use this page to check common replacement bulbs for the 2013 Escape, including headlights, turn signals, brake lights, reverse lights, license plate lights, and cabin bulbs. The goal is to make bulb shopping easier and reduce the chance of ordering the wrong fit.
Fitment can vary on the 2013 Ford Escape depending on trim, package, body style, and whether the vehicle uses halogen or HID-style lighting. For example, some versions use H11 low beams, while Titanium models may use D3S low beams and H1 high beams, so do not assume every Escape uses the same headlight setup. If you are considering an aftermarket LED or HID conversion, make sure the bulb base, connector, and housing are compatible, and check whether the change is legal for road use in your area. The safest approach is to inspect the bulb currently installed in your Escape before ordering replacements, especially for exterior lights where small differences like 7440A versus 7440 or 168 versus 917 can matter.
Low beam fitment depends on trim and lighting package. This page lists H11 for some models and D3S for Titanium low beams.
The listed high beam bulb is 9005 for standard setups, while Titanium models may use H1 high beams.
The front turn signal bulb is listed as 7440A on this page.
The rear turn signal bulb is listed as 7440A.
The 2013 Ford Escape brake light bulb is listed as 3157R.
The tail light bulb is listed as 3157R.
The back up reverse light bulb is listed as 921.
The license plate light bulb is listed as 168 or 917.
The front parking light bulb is listed as 194 or 7441, and some SE setups may use 2827.
The front side marker light bulb is listed as 168NA.
The chart lists the center high mount stop light, trunk or cargo area light, dome light, and map light as LED.
Yes. Trim and lighting package differences can change fitment, so checking the installed bulb is the best way to confirm the correct replacement.