
PIAA 19615 9005 (HB3) Xtreme White Plus
$64.57
Buy on Amazon →
Used for: Headlight Bulb High Beam(S)
Used for: Headlight Bulb High Beam(Titanium)
Used for: Headlight Bulb Low Beam(S)
Used for: Headlight Bulb Low Beam(Titanium)
Used for: Back Up Reverse Light Bulb
Used for: Brake Light Bulb, Tail Light Bulb
Used for: License Plate Light Bulb
Used for: License Plate Light Bulb
Used for: Parking Light Bulb
Used for: Parking Light Bulb
Used for: Parking Light Bulb(SE)
Used for: Side Marker Light Bulb Front
Used for: Turn Signal Light Bulb Front, Turn Signal Light Bulb Rear
Used for: Turn Signal Light Bulb Front(S)
This 2015 Ford Escape bulb size guide helps you verify the correct bulb by lighting position, so you can match the right part before you buy. Because Escape trims and lighting packages can differ, the exact bulb used for each lamp may vary by model, engine, and market.
Use this page to check common exterior and interior bulb locations on the 2015 Ford Escape, including headlights, turn signals, brake lights, license plate lights, dome lights, and cargo area lighting. Matching the bulb to the correct position is the easiest way to avoid ordering the wrong replacement.
Fitment can vary on the 2015 Ford Escape depending on trim level, package, and whether the vehicle uses halogen or HID-style lighting. For example, some versions use H11 low beam bulbs, while Titanium models may use D3S low beams and H1 high beams, so it is important to confirm the exact setup on your vehicle before purchasing. If you are considering an aftermarket LED conversion, make sure the bulb base, beam pattern, and housing compatibility are suitable for your headlights or signal lamps. The safest approach is to check the installed bulb directly, compare it with the bulb chart on this page, and verify the part before ordering replacements.
Low beam fitment can vary by trim. Common listings for the 2015 Ford Escape include H11 low beams on some models and D3S low beams on Titanium models.
The high beam bulb is commonly listed as 9005 on many 2015 Ford Escape models. Titanium versions may use H1 for the high beam, depending on the lighting package.
Front turn signal fitment is commonly listed as 7440A. Some SE listings may show 7440 for the front parking light position, so it is important to match the exact lamp location.
The rear turn signal bulb is listed as 7440A.
The brake light bulb is listed as 3157R.
The tail light bulb is listed as 3157R.
The back up reverse light bulb is listed as 921.
License plate light fitment is listed as 168 or 917.
The front parking light bulb is commonly listed as 194 or 7441. Some SE fitments may use 2827 instead, so confirm the trim before buying.
The front side marker light bulb is listed as 168NA.
The center high mount stop light is listed as LED.
The dome light bulb is listed as LED, and the map light bulb is also listed as LED.
The trunk or cargo area light is listed as LED.
No. Trim and lighting package differences can change the bulb type, especially for headlights and parking lights. Always verify the exact trim and installed bulb before ordering.
Yes, many owners do, but the replacement should match the bulb base and be compatible with the housing. LED conversions can affect beam pattern and may not fit every lamp the same way as halogen bulbs.