
PIAA 19615 9005 (HB3) Xtreme White Plus
$64.57
Buy on Amazon →
Used for: Headlight Bulb High Beam(S)
Used for: Headlight Bulb High Beam(Titanium)
Used for: Headlight Bulb Low Beam(S)
Used for: Headlight Bulb Low Beam(Titanium)
Used for: Back Up Reverse Light Bulb
Used for: Brake Light Bulb, Tail Light Bulb
Used for: License Plate Light Bulb
Used for: License Plate Light Bulb
Used for: Parking Light Bulb
Used for: Parking Light Bulb
Used for: Parking Light Bulb(SE)
Used for: Side Marker Light Bulb Front
Used for: Turn Signal Light Bulb Front, Turn Signal Light Bulb Rear
Used for: Turn Signal Light Bulb Front(S)
This 2016 Ford Escape bulb size guide helps you verify the correct bulb by lighting position, so you can match the right part before you buy. Because Escape trim and lighting packages can vary, the bulb chart on this page is organized by location to make replacement easier and reduce guesswork.
Use this page to check the bulbs for headlights, turn signals, brake lights, parking lights, license plate lights, and interior lamps on the 2016 Ford Escape. Whether you are replacing a burned-out bulb or comparing halogen and LED setups, matching the bulb to the correct socket and position is the safest way to get the right fit.
Fitment can differ by trim, package, market, and body style, so always confirm the bulb type for your specific Escape before ordering. Some versions use halogen bulbs, while others use LED or different low-beam and high-beam setups, especially on Titanium models and vehicles with optional lighting equipment. If you are switching to aftermarket LED bulbs or doing a conversion, check beam pattern, connector style, and physical clearance, since a bulb that fits electrically may still not work well in the housing. The best practice is to inspect the installed bulb first and compare it with the chart on this page before purchase.
The 2016 Ford Escape can use H11 low beam bulbs on some trims, while Titanium models are listed with D3S low beams.
The high beam bulb is listed as 9005 on most versions, and Titanium models are listed with H1 high beams.
Front turn signal fitment is listed as 7440A on the page, and there is also a 7440 listing for some front turn signal applications.
The rear turn signal bulb is listed as 7440A.
The brake light bulb is listed as 3157R.
The tail light bulb is listed as 3157R.
The back up reverse light bulb is listed as 921.
The license plate light bulb is listed as 168 or 917.
The front parking light bulb is listed as 194 or 7441, and some SE models are listed with 2827.
The front side marker light bulb is listed as 168NA.
Yes. The page lists the center high mount stop light, trunk or cargo area light, dome light, and map light as LED.
No. Both are listed on the page, but they are separate lighting positions and should be checked individually.
Because trim and lighting package differences can change the bulb type, especially for headlights and parking light applications.
Yes, but fitment and performance can vary. Make sure the LED bulb matches the socket, fits the housing, and produces a proper beam pattern.
Check the bulb installed in your vehicle and compare it with the bulb position listed on this page before ordering a replacement.