
PIAA 19615 9005 (HB3) Xtreme White Plus
$64.57
Buy on Amazon →
Used for: Headlight Bulb High Beam(S)
Used for: Headlight Bulb High Beam(Titanium)
Used for: Headlight Bulb Low Beam(S)
Used for: Headlight Bulb Low Beam(Titanium)
Used for: Back Up Reverse Light Bulb
Used for: Brake Light Bulb, Tail Light Bulb
Used for: License Plate Light Bulb
Used for: License Plate Light Bulb
Used for: Parking Light Bulb
Used for: Parking Light Bulb
Used for: Parking Light Bulb(SE)
Used for: Side Marker Light Bulb Front
Used for: Turn Signal Light Bulb Front, Turn Signal Light Bulb Rear
Used for: Turn Signal Light Bulb Front(S)
This 2014 Ford Escape bulb size guide is organized by lighting position so you can quickly verify the correct replacement bulb for each exterior and interior light. Whether you are replacing a headlight, tail light, license plate lamp, or cabin light, this page helps you match the bulb size to the exact location on the vehicle.
The 2014 Ford Escape uses different bulb types depending on trim, lighting package, and market, so it is important to check the specific position before buying. Use this page to compare the listed bulb sizes for the 2014 Ford Escape and confirm the right fit for your vehicle before installation.
Fitment can vary between S, SE, Titanium, and other versions, and some vehicles may use different headlight or parking light setups depending on factory equipment. Halogen and HID/LED-equipped models do not always share the same bulb sizes, and aftermarket LED conversions may require additional adapters, resistors, or housings to work properly. Before ordering, it is smart to inspect the bulb already installed in your Escape and compare it with the bulb chart, especially if the vehicle has been modified or if a previous owner changed the lighting components.
The 2014 Ford Escape may use H11 low beam bulbs on some trims, while Titanium models are listed with D3S low beam bulbs. Always confirm your trim and headlight type before ordering.
The high beam bulb is listed as 9005 on most versions, and Titanium models are listed with H1 high beam bulbs. Check the headlight package on your vehicle to make sure you choose the correct one.
Front turn signal bulb fitment can vary. The chart lists 7440A for one setup and 7440 for another front turn signal application, so verify the exact housing before purchase.
The rear turn signal bulb is listed as 7440A for the 2014 Ford Escape.
The brake light bulb is listed as 3157R for the 2014 Ford Escape.
The tail light bulb is listed as 3157R for this model year.
The back up reverse light bulb is listed as 921.
The license plate light bulb sizes listed for the 2014 Ford Escape are 168 and 917.
The front side marker light bulb is listed as 168NA.
The parking light bulb is listed as 194 or 7441 on some versions, and SE models are listed with 2827. Trim level matters here, so verify the exact setup.
Yes, the chart lists LED for the center high mount stop light, trunk or cargo area light, dome light, and map light. That means those locations may already be equipped with LED lighting from the factory.
Because the 2014 Ford Escape can have trim and package differences, the bulb in your vehicle may not match every listing. Checking the installed bulb helps avoid ordering the wrong size, especially for headlights and parking lights.