
PIAA 15223 H3 Xtreme White Plus
$67.15
Buy on Amazon →
Used for: Fog Light Bulb Front
Used for: Fog Light Bulb Front
Used for: Headlight Bulb High Beam and Low Beam
Used for: Back Up Reverse Light Bulb
Used for: Brake Light Bulb, Tail Light Bulb
Used for: Center High Mount Stop Light Bulb
Used for: License Plate Light Bulb
Used for: License Plate Light Bulb
Used for: Parking Light Bulb, Turn Signal Light Bulb Front
Used for: Side Marker Light Bulb Front
Used for: Turn Signal Light Bulb Rear
Used for: Turn Signal Light Bulb Rear
Used for: Automatic Transmission Indicator Light Bulb
Used for: Courtesy Light Bulb(Compare to original - Option 1)
Used for: Courtesy Light Bulb(Compare to original - Option 2)
Used for: Courtesy Light Bulb(Compare to original - Option 3)
Used for: Engine Compartment Light Bulb
Used for: Instrument Panel Light Bulb(Compare to original - Option 1)
Used for: Instrument Panel Light Bulb(Compare to original - Option 1)
Used for: Instrument Panel Light Bulb(Compare to original - Option 2)
This page helps you verify the correct bulb sizes for a 1999 Jeep Wrangler by lighting position, so you can match the bulb to the exact job before you buy. Because Wrangler trim and lighting equipment can vary by market and body style, it is smart to confirm each bulb location separately instead of assuming every light uses the same part.
For the 1999 Jeep Wrangler, common bulb positions include the headlight bulb, front turn signal, parking light, rear turn signal, brake light, tail light, reverse light, license plate light, and several interior and dash bulbs. Using the position-based chart makes replacement easier and helps reduce mistakes when you are servicing exterior lights, cabin lights, or the instrument panel.
Fitment can vary with trim package, factory options, and any previous lighting changes, so always compare the installed bulb to the listing before ordering. If your Wrangler still uses halogen lighting, the listed bulb sizes should help you match the original setup, but LED upgrades and aftermarket conversions may require different bulbs, resistors, or housings to work correctly. It is also a good idea to inspect the old bulb for the printed number, check the socket style, and confirm whether the vehicle has standard or optional lighting equipment before purchase.
The listed headlight bulb for the 1999 Jeep Wrangler is H6024 for both high beam and low beam applications.
The front turn signal light bulb is 3157.
The parking light bulb is 3157.
The rear turn signal bulb is listed as 1157 or 198, depending on the exact setup.
The brake light bulb is 1157R.
The tail light bulb is 1157R.
The back up reverse light bulb is 1156.
The license plate light bulb sizes listed are 168 and 917.
The center high mount stop light bulb is 921.
The front side marker light bulb is 168NA.
The front fog light bulb is listed as H3C or H3.
The automatic transmission indicator light bulb is 658.
Two instrument panel bulb options are listed: 194 or 7441 for one comparison, and 2721 for another comparison.
The courtesy light bulb options listed are 912, 212-2, and 89, depending on the original setup being compared.
Some positions have multiple listed options because trim, market, or original equipment differences can change the bulb used in that location.
Yes. Checking the installed bulb is one of the best ways to confirm fitment, especially on a 1999 Jeep Wrangler with possible trim or lighting package differences.