
PIAA 15223 H3 Xtreme White Plus
$67.15
Buy on Amazon →
Used for: Fog Light Bulb Front
Used for: Fog Light Bulb Front
Used for: Headlight Bulb High Beam and Low Beam
Used for: Back Up Reverse Light Bulb
Used for: Brake Light Bulb, Tail Light Bulb
Used for: Center High Mount Stop Light Bulb
Used for: License Plate Light Bulb
Used for: License Plate Light Bulb
Used for: Parking Light Bulb, Turn Signal Light Bulb Front
Used for: Side Marker Light Bulb Front
Used for: Stepwell Light Bulb, Courtesy Light Bulb
Used for: Turn Signal Light Bulb Rear(Compare to original - Option 1)
Used for: Turn Signal Light Bulb Rear(Compare to original - Option 2)
Used for: Turn Signal Light Bulb Rear(Compare to original - Option 2)
Used for: Automatic Transmission Indicator Light Bulb, Instrument Panel Light Bulb(Compare to original - Option 1)
Used for: Dome Light Bulb
Used for: Engine Compartment Light Bulb
Used for: Instrument Panel Light Bulb(Compare to original - Option 2)
This 2004 Jeep Wrangler bulb size guide helps you verify the correct bulbs by lighting position, so you can replace a failed lamp without guessing. Whether you are working on the headlights, tail lights, interior lights, or the license plate lamps, this page organizes the bulb fitment information in a simple way for the 2004 Jeep Wrangler.
Because trim, body style, and lighting package can vary by market, it is smart to confirm the bulb type for the exact socket on your vehicle before ordering. Use this page as a quick reference for the 2004 Jeep Wrangler and match each bulb to the correct location before you buy.
For best results, compare the listed bulb size with the bulb already installed in your Jeep, especially if your Wrangler has been modified or uses aftermarket lighting. Halogen and LED replacements may fit the same socket but can behave differently in beam pattern, brightness, and polarity, and some LED conversions may need load resistors or adapters to work correctly. This is especially important on older vehicles like the 2004 Jeep Wrangler, where previous owners may have changed headlamps, fog lights, or interior bulbs. If the lighting has been converted or repaired before, checking the installed bulb before purchase is the safest way to avoid a mismatch.
The headlight bulb size listed for the 2004 Jeep Wrangler is H6024 for both high beam and low beam applications, depending on the setup on the vehicle.
The front turn signal bulb is listed as 3157 for the 2004 Jeep Wrangler.
The parking light bulb size for the 2004 Jeep Wrangler is 3157.
The brake light bulb and tail light bulb are both listed as 2057R on the 2004 Jeep Wrangler.
The back up reverse light bulb size for the 2004 Jeep Wrangler is 1156.
Rear turn signal fitment can vary. The listed options are 2057 for one configuration and 1157 or 198 for another configuration on the 2004 Jeep Wrangler.
The front fog light bulb is listed as H3C or H3 for the 2004 Jeep Wrangler.
The license plate light bulb is listed as 2825 or 98 for the 2004 Jeep Wrangler.
The dome light bulb is listed as 211-2, while the courtesy light and stepwell light bulbs are listed as 906.
The center high mount stop light bulb is listed as 921 for the 2004 Jeep Wrangler.
Yes. The front side marker light bulb is listed as 2821.
Two instrument panel bulb options are listed: 658 for one configuration and PC74 for another, so you should verify the installed bulb before ordering.
Yes. Trim, lighting package, market, and body style can change the bulb used in certain positions, so the exact fitment should be confirmed for your 2004 Jeep Wrangler.
Yes, many positions can be upgraded to LED if the socket matches, but you should check fitment, beam pattern, and any load or polarity requirements before installing them.