
PIAA 19618 Xtreme White Plus
Buy on Amazon →
Used for: Headlight Bulb High Beam and Low Beam(with halogen headlights)
Used for: Back Up Reverse Light Bulb (with halogen headlights)
Used for: Brake Light Bulb(with halogen headlights), Tail Light Bulb(with halogen headlights)
Used for: Daytime Running Light Bulb, Parking Light Bulb(Compare to original - Option 2)
Used for: Parking Light Bulb(Compare to original - Option 1)
Used for: Turn Signal Light Bulb Front
Used for: Turn Signal Light Bulb Rear(with halogen headlights)
This 2019 Jeep Wrangler bulb size page is designed to help you verify the correct bulbs by lighting position, so you can match the right part before ordering. Because Wrangler lighting can vary by trim, market, body style, and headlight package, it is important to confirm whether your vehicle uses halogen or LED equipment before replacing anything.
On this page, you can quickly check common exterior bulb locations for the 2019 Jeep Wrangler, including headlights, fog lights, turn signals, brake lights, tail lights, reverse lights, side markers, the license plate light, and the center high mount stop light. Use the bulb chart to compare each position and narrow down the correct fit for your specific Wrangler.
Fitment can differ between trims and lighting packages, especially on Wranglers equipped with factory LED headlights versus halogen headlights. For example, the halogen setup uses different bulb types than the LED setup, and some parking light listings may be shown as compare-to-original options. If you are converting to aftermarket LED bulbs, make sure the replacement matches the socket, polarity, and physical size, and check whether a load resistor or flasher upgrade is needed for turn signals. The safest approach is to inspect the bulb already installed in your Jeep before buying a replacement, since visual confirmation can help avoid ordering the wrong part.
For 2019 Jeep Wrangler models with halogen headlights, the headlight bulb is H13 for both high beam and low beam.
The front turn signal light bulb is 7440A.
For halogen headlights, the rear turn signal light bulb is 3157.
The brake light bulb for halogen headlights is 3157R.
The tail light bulb with halogen headlights is 3157R.
The back up reverse light bulb with halogen headlights is 7440.
LED-equipped versions use LED lighting for several positions, including the headlight high and low beam, fog light, center high mount stop light, license plate light, reverse light, side markers, brake light, tail light, and rear turn signal.
No. The bulb sizes and lighting types differ between LED and halogen packages, so you should match your Wrangler’s actual headlight setup before ordering.
The daytime running light bulb is 7443.
Two parking light references are listed: 7443 as compare-to-original option 2 and 7442NA as compare-to-original option 1.
The license plate light bulb is LED on the listings for this page.
Because trim, market, and lighting package differences can change the correct fitment, checking the installed bulb helps confirm the exact size and avoids ordering the wrong part.