
PIAA 15223 H3 Xtreme White Plus
$67.15
Buy on Amazon →
Used for: Fog Light Bulb Front
Used for: Fog Light Bulb Front
Used for: Headlight Bulb High Beam and Low Beam
Used for: Back Up Reverse Light Bulb
Used for: Brake Light Bulb, Tail Light Bulb
Used for: Center High Mount Stop Light Bulb
Used for: License Plate Light Bulb
Used for: License Plate Light Bulb
Used for: Parking Light Bulb, Turn Signal Light Bulb Front
Used for: Side Marker Light Bulb Front
Used for: Stepwell Light Bulb
Used for: Turn Signal Light Bulb Rear
Used for: Automatic Transmission Indicator Light Bulb, Instrument Panel Light Bulb(Compare to original - Option 3)
Used for: Courtesy Light Bulb
Used for: Dome Light Bulb
Used for: Engine Compartment Light Bulb
Used for: Instrument Panel Light Bulb(Compare to original - Option 1)
Used for: Instrument Panel Light Bulb(Compare to original - Option 2)
Used for: Instrument Panel Light Bulb(Compare to original - Option 2)
Used for: Instrument Panel Light Bulb(Compare to original - Option 4)
This page covers bulb sizes for the 2000 Jeep Wrangler and helps you verify the correct replacement by lighting position. Whether you are changing a headlight, a tail lamp, or a small interior bulb, matching the bulb to the exact location is the easiest way to avoid ordering the wrong part.
The 2000 Wrangler used several different bulb types across exterior and interior lighting, and some positions can vary by trim, market, or body style. Use the bulb chart on this page to compare each socket location before you buy, especially if your Jeep has been modified or if a previous owner changed the lighting setup.
For best fitment, always confirm the bulb already installed in your Jeep before purchasing a replacement. Trim and lighting package differences can affect certain positions, and halogen-to-LED upgrades or aftermarket headlight conversions may require a different bulb style, polarity check, or extra hardware. If your Wrangler has been modified, the factory bulb list may not match every lamp exactly, so a quick visual inspection of the old bulb is the safest way to confirm compatibility.
The headlight bulb listed for the 2000 Jeep Wrangler is H6024 for both high beam and low beam. Always compare the installed bulb and housing style before ordering, especially if the truck has aftermarket headlights.
The front turn signal bulb is 3157. The same bulb size is also listed for the front parking light position on this model.
The rear turn signal bulb is 2057. This is separate from the tail and brake light bulb, which is listed as 2057R.
For the 2000 Jeep Wrangler, both the tail light bulb and brake light bulb are listed as 2057R. That makes it important to match the correct socket position when replacing bulbs.
The license plate light bulb can be 2825 or 98, depending on the exact setup. Check the bulb currently installed in your Jeep before buying a replacement.
The dome light bulb listed for this Wrangler is 912. If your interior lamp has been changed or upgraded, confirm the socket and bulb shape before purchase.
The center high mount stop light bulb is 921. This bulb is commonly used in the third brake light location on the rear of the Jeep.
The back up reverse light bulb is 1156. If one side is out, it is a good idea to replace both sides together so the light output stays even.
The front fog light bulb is listed as H3C or H3. Because fog light housings can vary, checking the bulb already in the vehicle is especially important here.
The front side marker light bulb is 194NA. This is a small exterior bulb, so make sure the replacement matches the original base and shape.
The page lists several instrument panel bulb options: 103, 194 or 7441, 2721, and 658. These are shown as compare-to-original options, so the best choice depends on the exact cluster or dash lamp installed in your Wrangler.
The automatic transmission indicator light bulb is 658. This same bulb number is also listed as one of the instrument panel light options on this page.
Yes, many owners upgrade to LED bulbs, but fitment can vary by socket and housing. Some LED bulbs may need polarity correction, load resistors, or a compatible flasher to work properly without issues.
Because trim, market, body style, and prior modifications can change the bulb installed in a given position. Checking the old bulb helps confirm the correct size and avoids returns or fitment problems.