
PIAA 19615 9005 (HB3) Xtreme White Plus
$64.57
Buy on Amazon →
Used for: Headlight Bulb High Beam
Used for: Headlight Bulb High Beam and Low Beam
Used for: Headlight Bulb Low Beam
Used for: Back Up Reverse Light Bulb, Center High Mount Stop Light Bulb, Trunk or Cargo Area Light
Used for: Brake Light Bulb, Tail Light Bulb
Used for: License Plate Light Bulb
Used for: License Plate Light Bulb
Used for: Parking Light Bulb(with 2 headlights), Turn Signal Light Bulb Front(with 2 headlights), Turn Signal Light Bulb Rear
Used for: Parking Light Bulb(with 4 headlights), Side Marker Light Bulb Front, Turn Signal Light Bulb Front(with 4 headlights)
Used for: Ash Tray Light Bulb
Used for: Dome Light Bulb
Used for: Map Light Bulb
Looking for bulb sizes for your 2012 RAM 2500? This page is organized by lighting position so you can quickly verify the correct bulb for each exterior and interior lamp before you buy. That makes it easier to match the right replacement to the right socket, whether you are changing a headlight, tail light, or small cabin bulb.
The 2012 RAM 2500 can use different bulb setups depending on trim, body style, and lighting package. Use the bulb chart on this page to compare each location, including high beam, low beam, reverse light, license plate light, dome light, and more. Checking by position helps reduce mistakes when replacing bulbs on this truck.
Fitment can vary on the 2012 RAM 2500, especially if the truck has different headlight layouts or market-specific equipment. Some positions use halogen bulbs, while others may have been converted to LED by a previous owner or through an aftermarket kit. If your truck has been modified, the bulb listed for the original setup may not match what is installed now. For the best result, inspect the bulb already in the vehicle before ordering, and confirm the base style and connector shape. That is especially important for headlight conversions, because aftermarket LED or HID kits can change the required bulb type and may need additional hardware to fit correctly.
For this model year, the chart lists 9005 for the high beam bulb and H11 for the low beam bulb. Some configurations may use a combined H13 setup instead, so it is important to match the bulb type to the exact headlight assembly on your truck.
Yes, both the back up reverse light and the center high mount stop light are listed as 921 on this page. Always confirm the socket and lens location before replacing them.
The license plate light bulb is listed as 194 or 7441. Either may appear depending on the exact lamp design and market variation.
The dome light bulb is listed as 578. This is the interior overhead light bulb used in many RAM truck configurations.
The map light bulb is listed as 212-2. Check the overhead console or mirror area carefully, since some trucks may have different interior lighting packages.
The ash tray light bulb is listed as 37. This is an optional bulb position, so not every 2012 RAM 2500 will have it.
For trucks with 4 headlights, the front turn signal bulb and parking light bulb are listed as 3157A. For trucks with 2 headlights, both the front turn signal and parking light bulbs are listed as 3157.
The front side marker light bulb is listed as 3157A. This helps keep the front lamp assembly consistent with the other front signal and parking light positions on certain setups.
Both the brake light bulb and tail light bulb are listed as 3157R. That makes it easier to replace both rear functions with the correct bulb type.
The rear turn signal light bulb is listed as 3157. This is separate from the 3157R used for brake and tail light functions.
Yes, many owners upgrade to LED bulbs, but the replacement must match the correct base and fit the housing. LED bulbs can also change brightness, beam pattern, and warning behavior, so it is best to compare the original bulb type before buying.
Trim level, lighting package, body style, and market can all affect bulb fitment. A truck with one headlight layout may use H11 and 9005, while another setup may use H13 for combined high and low beam operation.
Check the installed bulb, the socket shape, and the lamp position on the truck. Matching the bulb to the exact location is the safest way to avoid ordering the wrong part, especially if the truck has been modified or has non-stock lighting.