
PIAA 19615 9005 (HB3) Xtreme White Plus
$64.57
Buy on Amazon →
Used for: Headlight Bulb High Beam
Used for: Headlight Bulb Low Beam(with projector-type headlights)
Used for: Headlight Bulb Low Beam(without projector-type headlights)
Used for: Back Up Reverse Light Bulb (with projector-type headlights)
Used for: Back Up Reverse Light Bulb (without projector-type headlights), Center High Mount Stop Light Bulb, Trunk or Cargo Area Light
Used for: Brake Light Bulb(without projector-type headlights), Tail Light Bulb(without projector-type headlights)
Used for: License Plate Light Bulb, Glove Box Light Bulb
Used for: License Plate Light Bulb, Glove Box Light Bulb
Used for: Parking Light Bulb(without projector-type headlights), Side Marker Light Bulb Front(without projector-type headlights), Turn Signal Light Bulb Front(without projector-type headlights)
Used for: Side Marker Light Bulb Rear(without projector-type headlights)
Used for: Turn Signal Light Bulb Rear(without projector-type headlights)
Used for: Engine Compartment Light Bulb
Used for: Map Light Bulb
This 2013 RAM 2500 bulb size page helps you verify the correct replacement bulb by lighting position, so you can match the right part before ordering. Because trim, body style, and lighting package can vary, the same truck may use different bulbs for the headlamps, tail lamps, reverse lights, and interior lights.
Use the chart to narrow down the bulb by location, then compare your truck’s headlight setup and rear lamp style. On this page you’ll find common fitments for 2013 RAM 2500 models, including projector and non-projector headlight configurations, along with exterior, cargo, and cabin lighting positions.
For best fitment, always confirm whether your truck has projector-type headlights or standard headlights, since the low beam and some rear lamp bulbs differ by setup. LED replacements may fit physically but still need the correct base and may not work the same as halogen bulbs without proper compatibility or load handling. If you are converting from halogen to LED, check beam pattern, polarity, and any required resistors or adapters. Before buying, compare the installed bulb number on your vehicle, since trim and package differences can change the exact bulb used even on the same 2013 RAM 2500.
It depends on the headlight type. Models without projector-type headlights use H11 low beam bulbs, while models with projector-type headlights use 9012 low beam bulbs.
The high beam headlight bulb is 9005.
For trucks without projector-type headlights, the front turn signal bulb is 3157A.
For trucks with projector-type headlights, the front turn signal bulb is LED on this page’s chart.
Without projector-type headlights, the rear turn signal bulb is 3157. With projector-type headlights, the rear turn signal bulb is LED on this page’s chart.
Without projector-type headlights, the reverse light bulb is 921. With projector-type headlights, the reverse light bulb is 7440.
Without projector-type headlights, the brake light bulb is 3157R and the tail light bulb is 3157R. With projector-type headlights, both brake and tail light positions are listed as LED on this page’s chart.
The license plate light bulb can be 194 or 7441.
The glove box light bulb can be 194 or 7441.
The map light bulb is 578.
The center high mount stop light bulb is 921, and the trunk or cargo area light bulb is also 921.
Check whether your truck has projector-type headlights, confirm the exact bulb number already installed, and verify the lighting position. Trim level, market, and body style can change fitment.