
PIAA 19615 9005 (HB3) Xtreme White Plus
$64.57
Buy on Amazon →
Used for: Headlight Bulb High Beam, Headlight Bulb Low Beam(with projector-type headlights)
Used for: Headlight Bulb Low Beam(without projector-type headlights)
Used for: Back Up Reverse Light Bulb (with projector-type headlights)
Used for: Back Up Reverse Light Bulb (without projector-type headlights), Center High Mount Stop Light Bulb, Trunk or Cargo Area Light
Used for: Brake Light Bulb(without projector-type headlights), Tail Light Bulb(without projector-type headlights)
Used for: License Plate Light Bulb, Glove Box Light Bulb
Used for: License Plate Light Bulb, Glove Box Light Bulb
Used for: Parking Light Bulb(without projector-type headlights), Side Marker Light Bulb Front(without projector-type headlights), Turn Signal Light Bulb Front(without projector-type headlights)
Used for: Side Marker Light Bulb Rear(without projector-type headlights)
Used for: Turn Signal Light Bulb Rear(without projector-type headlights)
Used for: Engine Compartment Light Bulb
Used for: Map Light Bulb
This 2017 RAM 2500 bulb size page helps you verify the correct bulbs by lighting position, so you can match the right fit before you buy replacements. Because the truck can use different setups depending on trim, body style, and lighting package, it is important to check the exact lamp location instead of assuming one bulb number fits every socket.
For the 2017 RAM 2500, the chart below covers exterior and interior bulbs such as headlights, turn signals, brake lights, tail lights, reverse lights, license plate lights, map lights, and cargo-area lighting. Some positions use different bulb types on projector and non-projector headlight setups, so this page is designed to make those differences easier to sort out.
Fitment can vary by market, trim, and factory package, so always compare your truck’s installed bulb before ordering. The 2017 RAM 2500 may use halogen bulbs in some positions and LED units in others, and aftermarket LED conversions can change the bulb style, beam pattern, or compatibility with the housing. If your truck has been modified, especially with retrofit headlights or upgraded tail lamps, confirm the socket and connector style first. When possible, remove the old bulb and check the number printed on the base before purchasing replacements.
The high beam headlight bulb is 9005 on the 2017 RAM 2500.
Models with projector-type headlights use a 9005 bulb for the low beam on this page.
Models without projector-type headlights use an H11 bulb for the low beam.
The center high mount stop light bulb is 921.
For 2017 RAM 2500 models with projector-type headlights, the back up reverse light bulb is 7440.
For 2017 RAM 2500 models without projector-type headlights, the back up reverse light bulb is 921.
Front turn signal bulbs differ by headlight setup: projector-type trucks use LED, while non-projector trucks use 3157A.
Brake light bulbs also vary by lighting package: projector-type headlight trucks use LED, while non-projector trucks use 3157R.
Tail light bulbs are LED on projector-type headlight trucks and 3157R on non-projector trucks.
Rear turn signal bulbs are LED on projector-type headlight trucks and 3157 on non-projector trucks.
The license plate light bulb can be 194 or 7441 on the 2017 RAM 2500.
The map light bulb is 578.
The glove box light bulb can be 194 or 7441.
The 2017 RAM 2500 can use different bulbs depending on projector vs. non-projector headlights, trim level, and lighting package, so the same lamp position may not have one universal bulb number.
Yes. Checking the installed bulb is the safest way to confirm fitment, especially if your truck has aftermarket lighting, a swapped housing, or a package that differs from the standard setup.