
PIAA 19615 9005 (HB3) Xtreme White Plus
$64.57
Buy on Amazon →
Used for: Headlight Bulb High Beam, Headlight Bulb Low Beam(with projector-type headlights)
Used for: Headlight Bulb Low Beam(without projector-type headlights)
Used for: Back Up Reverse Light Bulb (with projector-type headlights)
Used for: Back Up Reverse Light Bulb (without projector-type headlights), Center High Mount Stop Light Bulb, Trunk or Cargo Area Light
Used for: Brake Light Bulb(without projector-type headlights), Tail Light Bulb(without projector-type headlights)
Used for: License Plate Light Bulb, Glove Box Light Bulb
Used for: License Plate Light Bulb, Glove Box Light Bulb
Used for: Parking Light Bulb(without projector-type headlights), Side Marker Light Bulb Front(without projector-type headlights), Turn Signal Light Bulb Front(without projector-type headlights)
Used for: Side Marker Light Bulb Rear(without projector-type headlights)
Used for: Turn Signal Light Bulb Rear(without projector-type headlights)
Used for: Engine Compartment Light Bulb
Used for: Map Light Bulb
This page helps you verify bulb sizes for the 2016 RAM 2500 by lighting position, so you can match the correct replacement before you buy. Because trim level, lighting package, and body style can change the fitment, it is important to check the exact lamp location on your truck rather than relying on a single bulb size for every version.
For the 2016 RAM 2500, some positions use halogen bulbs while others may use LED or different bulb numbers depending on whether the truck has projector-type headlights. Use this guide to compare the headlight, tail light, brake light, turn signal, reverse, map, license plate, and cargo-area bulbs for your specific configuration.
Fitment can vary by trim, package, and market, so always confirm whether your truck has projector-type headlights before ordering. If you are switching from halogen to LED, make sure the replacement bulb matches the socket and is compatible with your truck’s electrical system, since aftermarket conversions can affect beam pattern, flash rate, or warning messages. The safest approach is to check the bulb currently installed in the vehicle, compare it with the listing on this page, and then buy the exact match before replacing any exterior or interior lamp.
The high beam bulb is 9005. The low beam bulb depends on the headlight type: projector-type headlights use 9005, while non-projector headlights use H11.
Yes. Several front lighting positions change based on whether the truck has projector-type headlights. For example, the low beam, turn signal, parking light, side marker, and reverse light bulb sizes can differ between projector and non-projector setups.
The center high mount stop light bulb is 921 on the 2016 RAM 2500.
The license plate light bulb uses 194 or 7441, depending on the exact lamp assembly.
The glove box light bulb is listed as 194 or 7441.
For projector-type headlights, the back up reverse light bulb is 7440.
For non-projector headlights, the back up reverse light bulb is 921.
Without projector-type headlights, the rear turn signal bulb is 3157 and the tail light bulb is 3157R. With projector-type headlights, the rear turn signal bulb and tail light bulb are both listed separately as LED.
The map light bulb is 578.
Yes. The trunk or cargo area light bulb is 921.
The engine compartment light bulb is 561, and it is listed as optional.
Yes. Checking the installed bulb is the best way to confirm fitment, especially on a 2016 RAM 2500 where trim and lighting package differences can change the bulb size for certain positions.