
PIAA 19615 9005 (HB3) Xtreme White Plus
$64.57
Buy on Amazon →
Used for: Headlight Bulb High Beam, Daytime Running Light Bulb
Used for: Headlight Bulb Low Beam(Base)
Used for: Headlight Bulb Low Beam(C SRT8, with halogen headlights)
Used for: Headlight Bulb Low Beam(C SRT8, with HID headlights)
Used for: Back Up Reverse Light Bulb, Turn Signal Light Bulb Rear(Base)
Used for: Brake Light Bulb, Tail Light Bulb
Used for: License Plate Light Bulb
Used for: License Plate Light Bulb
Used for: License Plate Light Bulb(C SRT8), Side Marker Light Bulb Front, Courtesy Light Bulb(Compare to original - Option 2), Reading Light Bulb Rear
Used for: License Plate Light Bulb(C SRT8), Side Marker Light Bulb Front, Courtesy Light Bulb(Compare to original - Option 2), Reading Light Bulb Rear
Used for: Parking Light Bulb(Base), Turn Signal Light Bulb Front(Base), Turn Signal Light Bulb Rear(C SRT8)
Used for: Parking Light Bulb(C SRT8), Turn Signal Light Bulb Front(C SRT8)
Used for: Side Marker Light Bulb Rear
Used for: Courtesy Light Bulb(Compare to original - Option 1), Interior Door Light Bulb
Used for: Dome Light Bulb, Map Light Bulb
Used for: Glove Box Light Bulb
Used for: Glove Box Light Bulb
Used for: Trunk or Cargo Area Light
This page helps you verify the bulb sizes for the 2006 Chrysler 300 by lighting position, so you can match the correct part to each exterior and interior lamp. Because trim level, lighting package, body style, and market can change the fitment, it is smart to confirm the exact bulb type for the specific socket you are replacing.
For the 2006 Chrysler 300, common bulb locations include the low beam, high beam, daytime running light, license plate light, dome light, map light, brake light, tail light, reverse light, and several courtesy and marker lights. Use the chart below to compare each position before buying replacement bulbs, especially if your car has a base setup or an SRT8 lighting package.
Fitment can vary between trims and packages, so always compare the bulb listed for your exact lighting position with what is installed on the car. Base models and SRT8 versions may use different bulbs for the same area, and some cars may have halogen headlights while others use HID low beams. If you are switching to aftermarket LED bulbs or making a conversion, check polarity, bulb length, and available space in the housing. The safest approach is to remove the old bulb first and confirm the number printed on the base before ordering replacements.
The base 2006 Chrysler 300 uses a 9006 bulb for the low beam headlight.
The high beam bulb is 9005.
The daytime running light bulb is 9005.
Most listings show 168 or 917 for the license plate light bulb.
Yes. The SRT8 can use D1S for HID low beams, or 9006XS for halogen low beams, depending on the headlight setup.
Both the brake light and tail light use 3057R.
The back up reverse light bulb is 3057.
The base model uses 3757A for both the front turn signal light and the parking light.
Yes. The SRT8 uses 3157A for the front parking light and front turn signal light.
Both the dome light and map light use 578 bulbs.
The glove box light bulb is 194 or 7441.
Check the trim, body style, and lighting package, then compare the installed bulb number with the chart for the exact position you are replacing.