
Marsauto M1C H11 LED Fog Light Bulbs, 30000LM 6000K Cool ...
$17.99
Buy on Amazon →
Used for: Fog Light Bulb Front
Used for: Fog Light Bulb Front
Used for: Headlight Bulb High Beam and Low Beam(with halogen headlights)
Used for: Headlight Bulb High Beam and Low Beam(with HID headlights)
Used for: Back Up Reverse Light Bulb
Used for: License Plate Light Bulb, Reading Light Bulb Rear
Used for: License Plate Light Bulb, Reading Light Bulb Rear
Used for: Glove Box Light Bulb
Used for: Glove Box Light Bulb
Used for: Interior Door Light Bulb, Trunk or Cargo Area Light
Used for: Map Light Bulb
This 2013 Chrysler 300 bulb guide helps you verify the correct bulb size by lighting position, so you can replace the right lamp without guesswork. Because trim level, lighting package, and body style can vary by market, it is important to match the bulb to the exact location on your vehicle before ordering.
Use the chart on this page to find common exterior and interior bulbs for the 2013 Chrysler 300, including headlights, fog lights, tail lights, license plate lights, map lights, and cargo-area lighting. The goal is to make bulb replacement faster and more accurate, whether you are restoring stock lighting or upgrading to LED replacements.
Fitment can differ between halogen and HID-equipped cars, and some trims use different lighting hardware depending on package or region. For example, the 2013 Chrysler 300 may use D3S bulbs with HID headlights or 9012 bulbs with halogen headlights, while the front fog light setup can call for H11 LED or H16 LED depending on the application. If you are considering an aftermarket LED conversion, confirm that the bulb base, connector, and physical clearance match the original setup. The safest approach is to check the bulb already installed in your vehicle before buying replacements, especially for positions like side markers, interior lamps, and rear lighting where variations are common.
Match the bulb by lighting position first, then verify the exact bulb type used on your trim and package. The same year and model can use different bulbs depending on whether the car has halogen or HID headlights and which lighting options were installed.
Yes. The halogen headlight application uses 9012 bulbs, while the HID headlight application uses D3S bulbs. Make sure you identify which headlight system your car has before ordering.
The front fog light bulb listing for this vehicle is H11 LED or H16 LED, depending on the exact setup. Check the installed bulb and the housing style to confirm the correct fitment.
The back up reverse light bulb is 7440 on the 2013 Chrysler 300.
The license plate light bulb is listed as 2825 or 98. Either of those sizes may apply depending on the specific lamp assembly.
The map light bulb is 578 on this model year.
The glove box light bulb is listed as 194 or 7441.
The trunk or cargo area light uses a 562 bulb.
The interior door light bulb is 562 on the 2013 Chrysler 300.
The rear reading light bulb is listed as 2825 or 98.
Yes, the bulb chart lists LED for the center high mount stop light, brake light, tail light, parking light, daytime running light, rear turn signal, front and rear side marker lights, and rear fog light.
Yes. That is the most reliable way to avoid fitment mistakes, especially on a 2013 Chrysler 300 with optional lighting packages or market-specific differences. Checking the old bulb helps confirm the base, size, and connector style.