
Marsauto M1C H11 LED Fog Light Bulbs, 30000LM 6000K Cool ...
$17.99
Buy on Amazon →
Used for: Fog Light Bulb Front
Used for: Fog Light Bulb Front
Used for: Headlight Bulb High Beam and Low Beam(with halogen headlights)
Used for: Headlight Bulb High Beam and Low Beam(with HID headlights)
Used for: Back Up Reverse Light Bulb
Used for: License Plate Light Bulb, Reading Light Bulb Rear
Used for: License Plate Light Bulb, Reading Light Bulb Rear
Used for: Glove Box Light Bulb
Used for: Glove Box Light Bulb
Used for: Interior Door Light Bulb, Trunk or Cargo Area Light
Used for: Map Light Bulb
The 2012 Chrysler 300 uses different bulbs depending on the lighting position, headlight type, and trim level, so it helps to verify each bulb size by location before ordering replacements. This page is organized to make that check easier, whether you are replacing a headlight, tail lamp, interior light, or a small exterior marker bulb.
For the 2012 Chrysler 300, some positions use LED assemblies while others use replaceable bulbs, and the headlight setup can differ between HID and halogen models. Use the bulb chart on this page to match the correct bulb to the correct lighting position and avoid buying the wrong part.
Fitment can vary by market, body style, and lighting package, so always confirm what is installed on your specific car before purchasing. The 2012 Chrysler 300 may use HID headlights with D3S bulbs or halogen headlights with 9012 bulbs, and some front fog light setups may use H11 LED or H16 LED depending on configuration. If you are converting to aftermarket LED bulbs, make sure the bulb type, connector, and physical clearance all match the housing. It is also a good idea to remove the old bulb and compare it before ordering, especially for smaller interior and exterior lamps where trim differences can affect fitment.
It depends on the headlight setup. Models with HID headlights use D3S bulbs for both high beam and low beam, while models with halogen headlights use 9012 bulbs.
Yes, on the listed headlight configurations the high beam and low beam share the same bulb type. HID-equipped cars use D3S, and halogen-equipped cars use 9012.
The front fog light bulb listing for this year includes H11 LED and H16 LED. The exact fit can depend on the vehicle’s package and market, so confirm the installed bulb before buying.
The bulb chart shows LED for the brake light and tail light positions. That means the lighting function is listed as LED on this page, so check the specific assembly before assuming a standard replaceable bulb.
The back-up reverse light bulb is listed as 7440.
The license plate light bulb is listed as 2825 or 98.
The glove box light bulb is listed as 194 or 7441.
The map light bulb is listed as 578.
The trunk or cargo area light bulb is listed as 562.
The interior door light bulb is listed as 562.
The rear reading light bulb is listed as 2825 or 98.
Yes. Trim level, lighting package, and market can change the bulb type or the way the lamp is built, so it is important to verify the exact configuration on your vehicle.
Yes. Checking the installed bulb is one of the best ways to confirm fitment, especially for the 2012 Chrysler 300 because some lighting positions vary by package and headlight type.